We have a 230 Select and our golden retriever likes to ride up front with my wife. There wasn't enough room on the seat so he would just stand in the center. I had a local canvas/upholstery shop make a cushion to drop into the center. I took a 3/4" piece of plywood and cut it to the shape of...
I mounted the transducer and routed the wires with no problem. I took the boat out on the ICW yesterday and couldn't get it to work. I pulled up and called Humminbird tech support while I was on the water and they diagnosed that I had a bad transducer. They're sending me a replacement. The...
It is a very clean boat. I just bought it in August. I searched from FL and the gulf coast through the rest of the eastern half of the country and ended up finding it 5 miles from my home.
I went back to the boat today and examined the mounting options. Does this look like a better mounting location? I could then route the wire up into the outdrive recess and take it through the hull into the open area to the right.
Thanks for the feedback. I was thinking of mounting it to the first horizontal step on the right as you come off of the bottom V. Then bring the wire through above and to the right of the outdrive. That would be the highest point out of the water. Would this work? See the photo. Sloburn...
Does anyone have a transom mounted transducer on their boat? If so, how did you run the connecting wire through the transom with the swim platform above it? I have a 230 Select and I have tried the shoot through the hull transducer and that didn't work. I would like to mount the transducer in...
I recently bought my 2009 230 select used. From the specs I found online I thought it had a 50 gal fuel tank. I've only had it on the water 3 times and each time I ran about 14 to 15 gallons through it each time and the fuel gauge indicated that I had used over 1/4 tank to near 1/2 tank of gas...
I recently bought my 2009 230 select used. From the specs I found online I thought it had a 50 gal fuel tank. I've only had it on the water 3 times and each time I ran about 14 to 15 gallons through it each time and the fuel gauge indicated that I had used over 1/4 tank to near 1/2 tank of...
I have a 2009 230 Select and I would like to install a GPS/Sonar/Chart plotter and I was hoping to use a shoot through hull transducer. Does anyone know if the hull is solid, or are there any hollow areas? I have heard that there may be a hull liner which would prevent the transducer from...