I have a 2004 Sea Ray 340 Sundancer With the engine and generator exhaust ports that are moulded/built into the hull with no actual thru hull fittings to remove. They are quite unsightly with chipped and damaged gel coat.
Inside the bilge is a long tube that runs from the hull to which the...
I am just replacing my original RL70C chartplotter/radar and Smartcraft, with SIMRAD EVO3 and VesselView.
I can't find any information on the factory fitted through hull transducer for the tilt angle.
The installer who is doing the work is removing the original transducer (forward centre line...
I know there have been a few threads on this subject already so apologies if I am covering old ground but I need some advice please.
Want to change out old white Windlass footswitches on 2004 Sea Ray 340 Sundancer fitted with Lofrans Progress Windlass to stainless steel.
Questions I have:
1...
Hi this is my first post here having just taken ownership of a 2004 340 sundancer.
Please can someone tell me how I unlatch and pull out the sliding platform for the old CRT located in the galley. I didn't see anything obvious and it seems really stiff so I didn't want to break anything. I...