Search results

  1. M

    Windlass davit mount

    I am reinstalling a windlass davit on my 96 270 Sundancer. Is the pulpit structural if I use wood screws with 5200? I removed 4 wood screws and 2 bolts. The 2 bolt nuts fell off inside the pulpit.
  2. M

    Floor

    1996 Sun Dancer. Would like to install new snaps for overlay carpeting on floor in berth in front of sink and bathroom. Sounds like metal under current carpet? Is that a reinforcement or should I not install there? Thanks.
  3. M

    Drive shower

    Will a Bravo 1 or 3 drive shower work on a Bravo 2? I am unsure if the top caps are the same and am looking at a top mount shower from another vessel.
  4. M

    Steering swivel

    I have a leak from my upper steering swivel seal. We have decided to go the JR Marine route. What items are need for a Bravo 2 besides the pin, seal and cover? Bushings?
  5. M

    Navigation switch

    How would I find a wire schematic for a navigation light switch on my 96 Sundancer?
  6. M

    Engine coupler grease

    I have read multiple articles on greasing the engine coupler on my Bravo. is the LUCAS Marine multi purpose grease ok for this? It is NLGI #2
  7. M

    Power steering cooler

    I have been unable to locate a power steering cooler on my boat? 1996 270 Sun Dancer 7.4 Liter. Is it possible I don't have one?
  8. M

    Speedometer inop.

    96' Sundancer 270 7.4 Merc Bravo 2. I removed the tube going into the out drive and was not able to blow into it so i'm pretty sure it's not the cause. Is there anything in the outdrive that could be plugged or broken causing my speedo to not work? I removed the gauge also and it appears ok...
Back
Top