Search results

  1. S

    2005 300 Sundancer ignition issues on port engine

    Will check again. Thanks
  2. S

    2005 300 Sundancer ignition issues on port engine

    No drop in volt Guage. No sound in starter or solenoid. Once engine has sat for about 45 min to hour it will turn right back over. Again first thing in morning it starts up and will run the entire day. Once you turn off and anchor and a couple of hours later it won't turn over(port). At the end...
  3. S

    2005 300 Sundancer ignition issues on port engine

    Yes I had EMI in engine room replaced about 6 months ago. I will check schematics in owners manual on the other one. I believe we checked that also.
  4. S

    2005 300 Sundancer ignition issues on port engine

    Port engine won't crank. Dead, guages are active when buzzer goes on but acts dead.
  5. S

    2005 300 Sundancer ignition issues on port engine

    Even if the engine doesen't crank ? Again, after about 45 min will start right up.
  6. S

    2005 300 Sundancer ignition issues on port engine

    Motor won't crank , just dead when you hit ignition. Guages all are active .
  7. S

    2005 300 Sundancer ignition issues on port engine

    I've replaced both starters,solenoids, ignition switches, checked wiring, fuel pump modules are new. I've replaced virtually every major part on the engine and this ignition issues started a month ago. The port engine starts right up first thing in the morning and can run the entire day but if I...
  8. S

    2005 Sundancer 300 starter issues

    2005 Sundancer 300 starter issues
  9. S

    Can you run AC system off of Shore power or does generator need to be working? I can't get a...

    Can you run AC system off of Shore power or does generator need to be working? I can't get a straight answer from anyone at marina. Does water have to circulate?
  10. S

    Running AC off of shore power

    Running AC off of shore power
  11. S

    300 Sundancer questions.

    Yes you can step down on batteries especially if the covers are on the pegs. Seen mechanics do a million times and won't hurt them
  12. S

    300 Sundancer questions.

  13. S

    300 Sundancer questions.

    In manual the zinc part # is 1410589 Description is Trim tab Zinc only. ZINC3 I can screen shot from manual if you need..I've a 2005 300 Sundancer
  14. S

    300 Sundancer questions.

    Sorry let me look
  15. S

    300 Sundancer questions.

  16. S

    300 Sundancer questions.

    Try this
Back
Top