Search results

I'm looking for a dealer that sells Yamalube 2M two stroke outboard oil from bulk, in other words where you bring in your empty containers to be filled. I know it's a decent savings amount when doing it this way. I live in Maryland and the dealer could be located as far south as South...

I've got a 2009 Mercury 3.5 HP 4 stroke outboard with about 15 hours run time on it that I bought awhile back. It starts right up and idles but if I turn the throttle up it stops running almost immediately. If I pull the choke all the way out while it is idling it will run at high RPM's. Push...

I've got a Westerbeke 7.2 BCGTC generator that I want to replace the spark plugs in. I'd like to get a part number for a NGK spark plug, anybody know what the number would be? The Westerbeke spark plug number is 43071. I'd also like to replace the fuel filter with a WIX or NAPA fuel filter...

I'm in the process of removing the old Nevercold DE 461 refrigerator, soon to meet the inside of a recycle dumpster where it belongs, what a POS. I've got the Vitrifigo model DP 2600 coming in this week as the replacement. I know this model sticks out of the cabinetry by about 2 inches but I...

I'm in the process of replacing the raw sea water pump with a new Mercruiser sea water pump #46-862914T08. The new pump doesn't come with the serpentine belt pulley. I need to remove the old pulley from the old pump shaft and install it on the new pump. Is the correct procedure to use a...

I know there are a bunch of threads on engine oil already, but I'm looking for an answer as to what weight/viscosity people are using when they switch to synthetic oil which is not a Mercruiser product. I've got gas 2004 8.1L motors in my boat. I know Mercruiser has semi synthetic 25W40 and now...

How does the light body in the bathroom come apart to change a bulb? It has a large round ring and in the center is the white lense. I thought you were supposed to turn the ring counter clockwise to release it. I used a piece of rubber to get some grip on the ring but nothing moved. I also...

I've got a spare set of factory three blade props for sale off of a late model 320 Sundancer with v-drive inboards in excellent condition. They are: 18 DIA X 19 Pitch LH 1-1/2" shaft 18 DIA X 18.5 Pitch RH 1-1/2" shaft I'm asking $500 for the pair, pick up only, no shipping. Al (410)...

RAW WATER PUMP IMPELLER INSTALL I put this right up on the 320 thread but I thought it might help to also place it in the maintenace section too. Let me start out by saying I’ve been doing a lot of work on my boats for years and this is the first time I’ve done the newer style water pump...

I'm going to change the raw water impellers on my 2006 320 Sundancer with 6.2L v-drives this winter. I've done this before on some v-drive boats and they aren't fun. I've got a couple of questions and would appreciate any help I can get. 1. I've got the fuel cooler boxes mounted over the raw...

I'm thinking about changing my outside deck refrigerator out for an icemaker on my 2006 320 Sundancer. Do you know what brand and model number would fit under the sink where the refrigerator is currently installed? I'd love to get the short height model (it has the compressor behind the ice box)...

I'm thinking about changing my outside deck refrigerator out for an icemaker on my 2006 320 Sundancer. Does anybody know what brand and model number would fit under the sink where the refrigerator is currently installed? I'd love to get the short height model (it has the compressor behind the...

I've got a 2006 32' Sundancer w/6.2L v-drives and I'm trying to determine what the correct size 4 blade props would be going from the 3 blades. I sold my 1991 35' Sea Ray last fall and just bought this boat. I thought I would try and get the 4 blade props before I put it in the water for this...