I was just curious should my RPM's be at when I am at full throttle? Is there a range? I have a 1992 200 overnighter with a 4.3 alpha one with stock prop.
I recently changed the seals, impeller and shift cable on the stern drive. I just put everything back on today and tested it out. When I shifted out of nuetral the prop made a clunking sound as it started to turn then after about three to four times it stopped and accelerated smoothly. What...
When putting the sterndrive on is it okay to put the rubber gasket in first then slide the drive in? It seemed like everytime I put it onto the drive It wouldn't slide in but get pinched and push out?
I am trying to get the sterndrive back in but i am having a hard time. Any tricks to make it easier? Second question is does anyone know what is the purpose of the little ball and spring on the starboard side of the drive?
I am installing the anode set and I noticed that the are no holes in the bearing carrier or the trim cylinders to attatch them. What do you do in this situation? Second question is do the anodes have to be directly against bare metal or can I paint the area on the drive before I install them?
I just finished putting the stern drive back together after changing all of the seals, gaskets and the water pump impeller. My question is I notice when I turn the prop shaft it causes the shift lever to move into neutral. However if I turn the drive shaft from the top it is just very hard to...
I have a 1992 200 overnighter with the 4.3 engine. When I went removed the exhaust manifold to replace it I noticed a small section of the valve cover was rusted away. I was wondering if anyone knows what car the engine relates to so I can get the covers from the auto parts store and possibly...
I began today to take apart the stern drive to rebuild it because I noticed a discoloration in the oil. The gears are in good shape so I think the problem has not gone on for to long. I am going to order new seals and change them. However I got distracted and forgot to pay attention to the...
I began to wax the boat today with maguires marine cleaner/wax. As I was applying it the bow started to turn pink. The applicator was new, the boat is white and the wax is beige. So can anyone tell me what is happening?????
I am going to be keeping my boat in the marina in saltwater and I was wondering what people do as far as wash downs and cleanup after a day out. I know when your trailering you can flush everything out but is this possible while the boat is still in the water. What about the carpet should that...
Has anyone ever replaced the side windows of the bimini top? When opened the top set the side windows were in very bad shape. I was also thinking of possibly making a template and trying to make my own. Has anyone ever tried a project like this?
I have a 1992 200 overnighter with a 4.3 V-6 Alpha. while cleaning I noticed a crack in the side of the port side manifold near the bottom. Its not leaking very bad but it is leaking. Should I replace them both including the exhaust elbow or just wait till it gets worse. What should I check for...
There is a uniden depth gauge on my dash with up and down buttons and an alarm. Does anyone know if this is factory installed or something added on later? There is currently an old fishfinder. Is it possible they use the same transducer? If I am purchasing a GPS combo then is this work fixing?
I recently purchased a 1992 SeaRay 200 overnighter. My question is the up button on the throttle handle is not working. The trailer button works as does the down button. The seller gave me two position sensors to change on the outdrive. He said that these sensors were for the gauge on the dash...