Search results

I'm just wondering if anyone has a garmin dome radar and what mount to use. Do i need a 4 or 6 degree and how many inch's tall do i get?

The sync is not workin. But by ear the engines seem to be perfect sync as far as rpm show. I replaced the meter and still not right. If this makes a difference the boat had the rpm gauges changed before I bought it. What could it be?

Just order my set of Hurley H20. I tried not to puke as i paid the price for them, but i see it as the best solution to minimizing and crap bolted to the platform. Anyone here use them or here any reviews?

Looking to replace my battery charger/inverter. I have a 2001 340 Sundancer with 4 batteries. Im installing a pretty massive sound system so I'd like to get somthing to help with that while the genny is running out on the lake. Any suggestions to what kind or brand to get??

I have my boat in the water and there is a freeze warning in effect for tonight. They said between 2am-8am it will dip into the mid to upeer 20's. Can 6hrs of those temp do any damage? Seems like ice doesnt real form and exspand that fast.

Anyone here belong to any boat clubs on the Island?

I just took my boat out for the first time and my starboard engine is over heating. It looks as if the antifreeze is not circulating. Usually i see it circulating from the over flo tank to the engine but i got nothing. When i popped the cap off i dont see anti freeze filled to the top....not...

how often do you change your spark plugs and wires?

So i was going to change my trans fluid this season. I got the boat last year and have no clue when it was done last or if it was ever done at all. But today i checked it and it seemed to be clean and did not smell burnt or anything. Should i just leave it alone or change it. Is there any signs...

Last year was the first season with my boat and before i launched it i touched up the bottom paint. I was not sure what type of paint was already on there so i went with some west marine ablative bottom paint ($119.00 a gallon kind). Well needless to say when i pulled the boat out after the...

So I winterized my water sytem and everything went great! Well almost... spilled a gallon of AF in the bilge:smt021. Now i have a leak :smt013. Where i disconnected the cold waterline from the hot water tank it now leakes. I pushed the line back in the cupling and put the retainer clip back in...

Ok i'm completley disscusted with the way my bilge looks. First while winterizing my water system I got a bunch of red pop down in the bilge. While bypassing my hot water tank My fitting came loose and let a bunch of it all down in the bilge. Then just from me trampling around down there...

So today I winterized my engines...the port side went perfect. When i did the starboard side it was a little weird The AF was coming out where my shaft comes out of the boat. It did seem to come out the exaughst also but way more was pouring out the shaft. I'm confused why it would come out...

Is there anyone that has shrink wraped this boat first hand. I need to buy shrink wrap but I do not know the width to get. I was thinking 28ft???? I know I can mesure it. But I thought someone may actually know the exact size to use. I want to buy the wrap this week and cant get to the boat...

Can any owners give some feed back on how this boat runs with the gas 380hp mercs. My boss is buying one, but is afraid on how it moves along with the gas engines. He was origianally looking for diesal's. He came across this one for olny 100k with 150hrs on it(fresh Water). Not a bad price I...

I took this pic of the connections by my hot water tank. Question is are these the 2 hoses that need to connect to by pass the hot water tank (red to the blue)

On a 340 or 330 sea ray what is the largest motor you have put in the back transom locker

thought i would move this from the general forum.... So i just bought a used dingy, it has a older Johnson Everude 9.9hp. Well I took it down to the boat and the dam thing wont fit in the back hatch compartment.:smt089 Just wondering what type and size others have fit in there back hatch. I...

So i just bought a used dingy, it has a older Johnson Everude 9.9hp. Well I took it down to the boat and the dam thing wont fit in the back transom locker.:smt089 Just wondering what type and size others have fit in there back locker. I know that the newer motors are not has bulky and big as...

I have a 340DA with closed cooled engines. I know i need to winterize the heat exchangers. Is it as easy is just pouring anti freeze in the sea strainer area and running a few gallons thru??? That is what i was told, but it seems to simple to be true:huh: