Hello,
I am a new owner of a 2010 Sundeck 260 and have an issue where the fuel gauge isn't properly reading the level of fuel. I've done some research and digging and see that I can try to test the sending unit and the fuel gauge, but this isn't as simple as I thought for two reasons:
1. The...
Hi all, My boat is SeaRay 37 - 2006
I have different measurements of engine water pressure. The port always marks me about half. I have already changed both sensors and put them original Mercury. The sensors were located above the transmission oil cooler. Does anyone have any idea about this...
I replaced the trim/limit senders on both of my drives recently. they work great! the limit switches are now adjusted correctly, and so are the trim senders.
Here is my issue; my gauges are foggy, so I bought some new ones. they are the old teleflex style with the chrome ring, and it is...
Hi!
Changed the trim sender kit last year.
After this the trim meter on the dash board moves just a tiny bit until it swings full up. the trim limit is working fine , and so is the trailer switch part as well. From what i found the resistance in the sender is 0-240 ohms. but running the meter...
This is my experience with a fuel leak on my 280 and how bad Marine Max has screwed it up. I hope all can learn from this.
I bought my 280 a year ago (from Jacksonville Marine Max) with 110 hours. Before the purchase, they agreed to fill the tank and do a 100 hour service on it. When my...