Air and Heat system

[Bill Z]

o.k. I am a new owner of a 320 with 6.2 Horizons V drive and westerbrake generator. My boat has a Crusair A/c system and heat. After it was commissioned I filled the water system and attempted to turn on the a/c heating system. Went to the breaker box and turned on the ac. But the control pad in the salon did not show any read out and I am thinking there was no power there. Can someone please walk me thru the process of commisioning the a/c and heating system. The manuals are not written in a way like "a/c for dumbies". By the way when I tried to turn on the system I was hooked to shore power. Any assistance would be appreciated.

 

[fc3]

Did you have the transfer switches set to shore and not generator? Did the volt meters show roughly 120VAC? Were the shore power indicator lamps lit?

 

[Bill Z]

Thank you Frank !
Will check on my next visit.

 

[Mr Salt]

Do you have a pump that pumps sea water through heat transfer circuit. If you have a seperate breaker for that pump and it is not turned on the AC system will not work.

 

[Bill Z]

Wouldn't the control pad in the salon show some form of life in any case ?

 

[Groucho]

Hi Bill, No power? Must be a breaker switch off somewhere. Did you happen to call Dunhams Bay SR? See you on the lake.