- Aug 26, 2020
- 826
- Boat Info
- 2001 380 Sundancer, Raymarine Electronics
2022 Highfield CL310 Dinghy with 20 HP Suzuki
- Engines
- 454 MPII Mercruiser w/ V Drives
I have a 2001 Sea Ray 380DA. It has two factory installed co detectors. One is in the galley high on the wall above the cabinets. The other is in the stateroom. I was in the process of upgrading to the current model and now have no power to the unit in the stateroom. I think a fuse may have blown but cannot find where it is located. I posted on the official 380 thread and someone suggested looking behind the DC panel. Unfortunately I opened both distribution panels and was not able to find an inline fuse in there.
So back to trying to find a fuse for the CO monitors that possibly may have blown. If it is the fuse, would there be a separate one for each detector or are they tied together? I have portable CO monitors on board but really want to fix the stationary one to bring it into spec with the USCG.
Any information is appreciated.
So back to trying to find a fuse for the CO monitors that possibly may have blown. If it is the fuse, would there be a separate one for each detector or are they tied together? I have portable CO monitors on board but really want to fix the stationary one to bring it into spec with the USCG.
Any information is appreciated.
