Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I use one that looks to be identical, but is less expensive. Works great. Use it for my RIB, SUP, and large high pressure inflatable dock.
I’ve used my vac for bulk inflation too. It’s great for that. A vac will only get to like 2 PSI though. A RIB or SUP usually calls for 14-15 PSI, with decent performance at 9-10 psi.A dockmate uses a Milwalke portable shop vac in reverse. Inflates his dingy in under 2 minutes.
I’ve used my vac for bulk inflation too. It’s great for that. A vac will only get to like 2 PSI though. A RIB or SUP usually calls for 14-15 PSI, with decent performance at 9-10 psi.
The inflator I linked to has a benefit of being dual mode. It will blow high volume low pressure for bilk inflation, then autoswitch to compressor mode for higher pressures.
I usually inflated it to like 7 or 8 psi. For kicks I put it to 14 - the performance increase was significant. Much harder on the butt and back though.We've touched on this before, but I can't imagine 14PSI on my RIB. 3.6psi is max from Mercury and it's hard as a rock at anything over 3psi.