Governor 7.2KW BCGTC need help

[Nathan400Sundancer]

I need a govenor either rebuilt unit, new or used unit.
The bearings are shot might be able to repair. Can anyone help me with parts , a rebuild kit or replacement unit new or used. Possibly someone to ship to for repair? Westerbeke lists new partnumber as R042822. Im having no luck. thankyou in advance. Located Kentucky

 

[B BARKER]

My bearings went out on my 6.5 BCG governor and I replaced them myself with bearings from the local bearing and seal place they had everything bearings, seals and new snap rings too....

 

[techmitch]

These guys are a sponsor here and I believe, offer a CSR member discount. If they don't have what you need, I gotta bet they will have a good lead.
https://browardarmature.com/
Welcome to CSR.

 

[Nathan400Sundancer]

My bearings went out on my 6.5 BCG governor and I replaced them myself with bearings from the local bearing and seal place they had everything bearings, seals and new snap rings too....

 

[Nathan400Sundancer]

Thankyou any idea on shop drawings to know how it goes back togther?
The inner bearing moved on me.

 

[Nathan400Sundancer]

These guys are a sponsor here and I believe, offer a CSR member discount. If they don't have what you need, I gotta bet they will have a good lead.
https://browardarmature.com/
Welcome to CSR.

Thankyou glad to be a part . Appreciate it.

 

[B BARKER]

The best I can remember mine would go either way and the rear one was stamped in from the factory so I left it alone it seamed to be ok, but the front one would go either way then the snap ring held it in place the best I can remember...I don't know about drawings maybe google it or something ?

 

[Nathan400Sundancer]

Thankyou