Raytheon to raymarine radar dome. Help please.

[JamesBay]

I had a Raytheon radar dome mounted on a pedestal. I purchased a new raymarine dome and the bolt holes from the new dome to the old pedestal don't match up. Does anyone know if the edson raymarine 6855 adapter plate would work for this situation? I can't replace the pedestal. Thanks.


Sent from my iPhone using Tapatalk

 

[dwna1a]

Can new holes be drilled and the old holes be filled? Or can you buy some starboard and build a adaptor plate?

 

[JamesBay]

I was hoping that someone sold a pre-drilled adapter plate. But last resort is to get starboard and drill holes.


Sent from my iPhone using Tapatalk

 

[dwna1a]

Call them directly, they were a great help explaining how to match a new GPS to my old radar unit. I ended up buying a cable from a guy in England

 

[JamesBay]

I called raymarine today. They don't know


Sent from my iPhone using Tapatalk

 

[dwna1a]

Ok, try this. Type in "radar dome mounting plate". When I typed the into my search bar I found a pretty good amount of them. Maybe one of them might work for your situation. Most are made by Edison Marine

 

[1956olds]

There is a guy on ebay that will custom build radar mounts in varying heights,he also says to contact him for mounts from one sytsem to another.

 

[JamesBay]

The Edison adapters won't work. I already talked with them and they sent the bolt patterns for the raymarine domes. The ones they sell go from 2k to 4k. Not Raytheon to raymarine. I will check with the guy on eBay.


Sent from my iPhone using Tapatalk