Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Bjac, what was the full model number of your Vitrifrigo? It looks like there are a few different C62 models.You will be more than happy with the Vitrifrigo C62. My captain loves it. The old "Notcold" slid out and the Vitrifrigo slid in. Plugged it in and good to go. Larger interior, lighted inside, larger freezer, and so quiet you cannot hear it running. Very happy with ours and when the back deck smaller "Notcold" goes belly up, a Vitrifrigo will replace it as well.
Anyone in need of usable navy canvas? Front is 2015. Rear is original 2006. Not perfect but Useable. $200 for the whole
thing.
private message sent !!Anyone in need of usable navy canvas? Front is 2015. Rear is original 2006. Not perfect but Useable. $200 for the whole
thing.
I’d deff like the make and model !!View attachment 59134 I replaced my cockpit fridge with this one. The opening was 15.25” wide 21.0” tall. Replaced with Norcold universal from west marine, I can get you the part number if needed.
Bjac, what was the full model number of your Vitrifrigo? It looks like there are a few different C62 models.
Bjac, what was the full model number of your Vitrifrigo? It looks like there are a few different C62 models.
Thank you!JJML The model of my Vitrifrigo is: C62 NA PFB B*VF/U
Bill
That harness is to small for m700/5. you need 4ga for power wire. I used that plug for an aux 12v plug by the sofa. It has its own breaker in the panel. You should run it to at least the battery switch but to the battery is recommended.Hi, I have a question for all 320 owners who recently upgraded their stereo amp under the couch. I bought a JL marine M700/5 and I can't wait to install it. I don't know much about electrical system and I would not want to create a fire hazard on my boat.
Some people mentioned in this thread in July they had to run power cables from the batteries to the Amp. Please excuse my ignorance but is it possible to connect the Amp straight to the DC panel instead?
Also, in the pictures below it looks like I have a 10amp accessory wire right next to the factory amp compartment, can i used that to power my new Amp? if yes, is it possible to put a bigger fuse than 10A on it?
View attachment 60069 View attachment 60070
That harness is to small for m700/5. you need 4ga for power wire. I used that plug for an aux 12v plug by the sofa. It has its own breaker in the panel. You should run it to at least the battery switch but to the battery is recommended.
View attachment 60082 View attachment 60083 View attachment 60084 Here is what I did.
Thank you scooper!!Tried it myself. 13 results. It was 13th:
http://clubsearay.com/index.php?threads/maximizing-your-multi-amp-sub-sound-system.40568/
Hmmm. Looking at that link, we may have found the clue to the new URL’s for the old posts!
Did you end up using the cup holder you posted from amazon?Upgraded cup holders and vhf radio today.