Look at adding a battery cutoff switch to my 200 sport. I just like to cutoff the battery when its in storage between uses to ensure I have no incidental battery drainage. I found this one that seems like it would be good for marine and had good reviews:
https://www.amazon.com/Audew-Battery-Switch-12V-Waterproof/dp/B07DPNRWXW/ref=sr_1_6?gclid=Cj0KCQiA7OnxBRCNARIsAIW53B-v_QThYB0vMlEbtEO4LVgZJygq5i8INPBN7_iGsbEhC-V3b37JxdYaAomsEALw_wcB&hvadid=214480696312&hvdev=c&hvlocphy=9020386&hvnetw=g&hvpos=1o1&hvqmt=b&hvrand=12560358828806467975&hvtargid=aud-836690481282%3Akwd-346877632205&hydadcr=9495_9892224&keywords=marine+battery+switch+disconnect&qid=1580934726&sr=8-6
The way I understand how to install these:
You leave the ground on the battery as it was and you don't need to "ground" the switch? Meaning you purchase a battery cable set but you only need the positive cable. Is that correct, nothing else is required?
Any further guidance or help (photos )would be appreciated.
thanks!
https://www.amazon.com/Audew-Battery-Switch-12V-Waterproof/dp/B07DPNRWXW/ref=sr_1_6?gclid=Cj0KCQiA7OnxBRCNARIsAIW53B-v_QThYB0vMlEbtEO4LVgZJygq5i8INPBN7_iGsbEhC-V3b37JxdYaAomsEALw_wcB&hvadid=214480696312&hvdev=c&hvlocphy=9020386&hvnetw=g&hvpos=1o1&hvqmt=b&hvrand=12560358828806467975&hvtargid=aud-836690481282%3Akwd-346877632205&hydadcr=9495_9892224&keywords=marine+battery+switch+disconnect&qid=1580934726&sr=8-6
The way I understand how to install these:
- Remove the cable wire(s) that are currently on the positive post of your battery and install them to the back of one of the posts on this switch.
- Purchase a new positive battery cable and attach it to the other post on this switch and then the other end goes back to the positive post on the battery.
You leave the ground on the battery as it was and you don't need to "ground" the switch? Meaning you purchase a battery cable set but you only need the positive cable. Is that correct, nothing else is required?
Any further guidance or help (photos )would be appreciated.
thanks!