- Nov 4, 2019
- 2,491
- Boat Info
- 2010 Sundancer 500
2015 Brig Falcon 330T
- Engines
- Twin Cummins QSC550 w Zeus Pods
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Anyone know where I can buy replacement vents for the dash?
View attachment 125218
Check the air plenum drains.After several days of driving rain, i've got water in my bilge. Most of it seems to have come through the engine room vents. Do you guys get the same?
I assume there's no real way to prevent this from happening?
Thanks!
Check the air plenum drains.
At least on my boat, there are drain fittings in the bottom and aft in the air plenums. There is a hose from those drain fittings to the common drain pipe. The air plenum is that open space behind the side vent grills.Thanks Tom.... Please pardon my ignorance but where are they? I haven't even started the engines in 2 weeks!
At least on my boat, there are drain fittings in the bottom and aft in the air plenums. There is a hose from those drain fittings to the common drain pipe. The air plenum is that open space behind the side vent grills.
My air plenums have access hatches located behind the solon seating.
Check measurements but it sure does look like this
https://www.go2marine.com/Directional-Euro-Louver-for-Heater-Craft-Units
Thanks Shaps, your always so quick with the hard to finds.
Welcome neighbor LOLI’ve been skimming this forum for far too long, taking all the helpful advice without dropping in. I guess its time to say hello!
View attachment 125902 [/ATTACH] Have decided to let my 2007 480 dancer go
Location: Lake St Clair
636 hours on Cummins 800 hours on generator
Has all the usual goodies. Washer/dryer Cockpit air, all chain windless, central vacuum, freedom lift with AB 11’ center console inflatable powered by 40hp yamaha (see advertisement on boat trader)
Use my e mail lauterbachspecial@yahoo.com
So I am confused... You are buying PAPA G's boat?I wanted to (hopefully) provide some closure on this boat as we have a purchase agreement and are working hard to get it into my hands! It's in amazing shape, freshwater, and owner seems to be meticulous in his attention to maintance and cleaning. I'd swear that he went over the insides with a toothbrush!
I had a PA on a 52 sedan but a number of things came up in survey and the broker seemed to be playing good cop bad cop with the situation (info just not coming back on the issues). Dealing direct with a passionate owner that loves his boat seems to work a lot better for me.
So I am confused... You are buying PAPA G's boat?
Nice display Shaps is it compatible with all the current wiring and engine harnesses !!! my oil pressure runs the same its about 5-8 psi different from the other motor, I like your confidence at 32mph/6.8ft depthIt was finally a nice evening (almost no wind and a very high tide).
View attachment 126335 View attachment 126336 View attachment 126337
Re worked props I feel I picked up almost 2mph at same load.
This is with full fuel and half a tank of fresh water.