Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
Hey, does anyone have any experience on removing the R80 monitor from the dash. I am yet to try,but when I looked it over it was not obvious on how to remove it. Any ideas?
Gus
Does anyone know how to remove the radar monitor from the dash of a 410 sun dancer. I know their has to be a proper method for this and any help would be appreciated? I am replacing the R80 pathfinder with a R80 pathfinder.:smt100
Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
Thanks for your thoughts Mistercomputer. I'll take it apart and check to see if the screws are broken off inside.
Hi Zach, we spoke about your radar gear about 6 months ago or so . Im interested in your radar equipment that you are selling. My name is Gus Sideris and you can reach me at 402-677-1456.
Gus
Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
Does anyone know how to tighten up the captains chair at the tube to base connection. I have a slite wobble. There is 4allen screws at the base,but they are already tight. So if anyone has a fix or a good...
Could you send me some pics? Also any details on screen size,and size of hole in dash.I have a 2000 410 and would like a color monitor. Thanks in advance
Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
Congratulation on your new purchase. I hope you enjoy your 410 as much as I do. It is truly a great vessel.
Gus
Well I pulled the end caps off the heat exchanger and it was pretty obvious what the problem was. The gasket at each end of the heat exchanger disintegrated, and was plugging the small holes on each end. That explains the difference in the volume of water coming out of the exhaust ports. Did I...
When I go back in a couple of weeks, I will check the amount of pure antifreeze in the system and if that is ok the heat exchanger is coming off. I will report back my findings.
Thanks for the brainstorming session !!!
Gus
I do not know if the engines water pump is original or not.It is not leaking like a water pump does on a car when it is going bad. But that is a good point. Is their any other way to check if the circulating pump is bad???
Thanks for your input!
Gus
Replaced the hose from the sea valve to the strainer.Still hot.I ran a thick wire though all the holles in the trans.Cooler and the oil cooler. Still no change. So the next step is to pull off the heat exchanger and lake it to a radiator shop and have it cleaned. One new thing I did notice, my...
Is the sea valve between the sea strainer and the engine,and did you have to have someone in the engine room to detect it. I am going to the lake this weekend and will definitely check on this. Thanks for your input.
Gus
The mechanic said he removed the hoses to check for obstructions and found none, I am not sure how he checked the flow. He checked the strainers and the though hull grill and said those were clear.He said they swapped he intake hoses and that changed nothing. And also the themostat. He also used...