Perfect, my switch at the stern gets bumped all the time, so the lights are left on often. I will change to these lights and and figure out a guard for those switches at the stern.
I have an ‘01 with 7.4’s. I troll primarily for Salmon on Lake Ontario. I’m not able to get down to trolling speed without a bag. I only use one 48” bag and hang it off the side the engine I’m trolling with. It gives you much more control.
Yes, you can buy the gasket at FP. It’s fairly inexpensive - it’s sold by the the foot. I bought 3 feet for each window and had plenty to spare. They have two different profiles, so you need to look at the one you have on your boat now, and match it to either of FP’s.
Hi Mike, Its a Bomar port light that can be purchased from Flounder Pounder. The screws are probably at their max because the gaskets are worn right down and the reason why it's leaking. I just replaced both my portlight gasket and actually had to back off the screws to accommodate the new...
Ok, from the pics, your boat is a little different than mine. The cowling is slightly different and so is the galley. What year is your boat? The problem I have is getting access through the speaker hole - I have sound proofing foam that seems to be tight in there so it doesn’t allow me to get...
You’re a champ - Thanks a ton. I decided to put it off until the season is done.
Where were the screws for the cowling? I just found four on the bottom and one at the top right corner that I can see. Are there others or is the caulking holding it in on the left top corner?
I’m looking for this vent cover that is located on the Starboard bow of the hull. I checked out FP Marine, but can’t seem to find it there. Anyone have an idea where I can find this?