Search results

I'm assuming you did the work yourself?

Update: Checked compression. Results in cylinder #4 at 0 psi. Going to pull the valve cover and see if my luck has changed. Pray for a valve issue...PLEASE! Reveler's Revenge

After numerous issues with my sea water pump and a few overheats on the gennie I noticed that when it runs now it is spitting oil from the pullies/belts and spraying me in the face. Is it just pissed off at me? :grin: I'm sure it has something to do with the numerous overheats but I'm not sure...

All are black and gummy. Some worse than others. I'm about to change them again and note what cylinders they come out of. Reveler's Revenge

I have an ongoing issue with my port engine. I noticed it was running rough earlier this season so I did some investigating. I ended up changing the plugs, wires, distributor cap and rotor button. I also ran a can of Sea Foam through the oil and treated the port side gas tank with it as well...

I have a Lofrans Progress 1 on my 290AJ and a plow anchor with 15 feet of chain braided to some OLD ass rode (which I need and plan to replace). It free falls perfect everytime. They don't make the P1 anymore buy that's not my point here. I would go with a plow anchor...period. Now I'm no pro...

I have contacted Imtra several times regarding parts for my 2000 year model windlass. They have always been helpful and I have not had to pay for part yet. I would start there first. You can find them online. Reveler's Revenge

quick update guys. I just replaced the circulation pump on my port engine and you guys were right! Everything's good to go...thanks again Reveler's Revenge

What a steal...and likely in the literal sense. Should I make an offer of $5? Reveler's Revenge

Whew!!! That's great news. I'll check at my local parts dealer and see what I can find tomorrow. Guess I'll borrow a laser thermometer from them and check the surface temps of the manifolds while I'm at it...can't hurt.

I noticed my port engine was dripping a fluid last time I ran it. A little investigation revealed that the liquid is salt water and it's coming from what seems to be a weep hole which is located directly behind the upper large pulley in the center of the engine. I'm assuming that this means that...

Re: Westerbeke 4.5 kw Gen. cranks but won't start. Need new Distributor Ignitor at $ Sounds like your mechanic covered the bases here. I was just thinking that he/she may have been in a rush because of work overload and missed checking for spark at each connection - plug, wire, and distrubutor...

I have a 2000 AJ290. I love it more and more every time I get on it. Just getting her ready for my first offshore fishing trip with her. One small gear lube leak to fix and I'm buying bait! Welcome to the club...let us know what you find out about the hard top. I've been considering it myself. I...

I have a 2000 4.5 BCGB and had the exact symptoms you are talking about. I initially thought that it was the capacitor. Turns out it was just the spark plugs. I had run bad gas thdough the gennie and gummed up the works. Did the mechanic trace the spark at the plug or the wire? Reveler's Revenge

It was a thought. Don't know anything about your model of boat. Hope you get it taken care of without much trouble. Good luck! Reveler's Revenge

Raymarine's product accessories page for the e7D states that the 20 degree tilted thru hull is product number E66087. I bought this model and the transducer extension terminal is incorrect for the e7D display connection. Airmar's website says the part number should be E66085. Does anyone know if...

I have a drive that is spewing gear lube. Seems like the harder I run it the more lube it loses. Did you experience the same thing? Also, where was the fitting in relation to the drive mounting. I'm pulling my boat today to take a good look. If you have pics that would be great. Thanks for any...

I don't know about an 89 300 but my 2000 AJ290 had water in the salon from a fouled sump pump. Don't know why the anchor locker would drain anywhere but overboard. Have you checked your sump pump lately? Reveler's Revenge

Good idea meeting with some experienced boaters! And yeah...the guys on here are a HUGE wealth of knowledge. This is a great community of people who have helped me out more than once. Have a safe trip, take lots of pics and video to share, and maybe I'll see you over at Shack this weekend...if I...

I agree here. The waters down here are treacherous to say the least. Wait foot the proper cartography and a solid engine...you will be glad. I've been boating here for thirty plus years and I ran aground not long ago. $2k in repairs to the outdrive alone! Be safe...come down in a week or so...