Has anyone pulled their engine air intake side vents out to re-bed them? I will be pulling mine this spring and looking for any advice on how they come out.
Thanks!
I just purchased the new panels from Flounder Pounder and they did not attach any studs. Once I get the old one off I will need to epoxy new studs on to it. Flounder Pounder was great to deal with, they asked what new electronics I was going to add and they cut out the openings for me. I...
Can anyone tell me how on the dash, the mid eyebrow panel (not the panel with the gauges but the one that traditionally held the VHF and GPS) comes out, as well as how the radar panel comes out? Neither have exposed fasteners. The gauge panel has exposed fasteners but not the mid brow or...
Hey Guys, not sure if this has been discussed before but how often do you change your water filters? Is there a time (i.e. annually) or number of hours? If you do change them do you get a water analysis first? Any info would be greatly appreciated. My boat is a 2001 with the 450 hp 6CTA's...
I will post pictures once done in the spring. I am planning a 12" MFD where the original screen was and a 9" MFD centered in the eyebrow panel in front of me. To do this I need to order new panels from Flounder Pounder.
Jaws,
I thought the new MFD's have internal GPS? The AR200 certainly looks sweet and would be a great add on with the camera and AIS in the future. One step at a time!
Thanks! Great information. In the spring I plan on a total upgrade. Axiom + 12 RV and an Axiom + 9 RV displays, Quantum 2 Radar, EV200 Autopilot and a Fusion connected stereo. Should put some new life into the old girl!
Has anyone upgraded their autopilot system? In the spring I am doing a complete Nav/Autopilot upgrade and will be changing the compass that is under the floor mid cabin. If anyone has done this any hints on how to get the new cables up to the helm would be very beneficial. Thanks in advance!
Has anyone had an issue plugging in at a marina with a new power pedestal and the boat blows the dockside GFI. I recently tried to plug in to a newer pedestal and as soon as I turn on either the AC Converter or the Port Systems the GFI at the pedestal trips. All other circuits are ok. At my...
Try MarineMax in Tampa, they were able to provide me a new systems interface box that goes in the engine room last year for my 2000 410 Sundancer, I heard they found a source to remake many of these parts. You will need to give them the OEM part number that is found in your owners parts book...
Thanks, it certainly looks challenging to say the least. Do most people pull any of the exhaust to get back there? Do they go in from the stern side (back of boat, front of engine) or from the transmission side? I am not the skinniest guy in the world....
Thanks,
Hello team, again new to the 460 and to this forum. I am staying with the Sherwood water pump housings for now, how on earth do you get to the Starboard pump to change the impeller? I am sure you guys have talked about it, any help is appreciated.