Search results

Brand new in wrapper original port side rail and stantions for 1992 370 DB or DA. Fits other years also. Didn't take photo of the rail because it's really long and safely stored in my basement. Rail is still in brown wrapper also. $400. PM me if interested. Mark

Sold

I have an original Sea Ray barrel chair from a 370 AC. Also used in 370 Sedan bridge and maybe other models. $200. PM me if interested. Mark

After discovering I had some pretty serious issues with a soft deck I was able to trace the problem back to an improperly installed forward main hatch by the boys at the Knoxville plant. You can see the dirt line from the hatch flange where it barely covered the cutout and the black foam gasket...

Not sure what this is or exactly what it does but the wires are burnt up and need repair but I'm concerned as to what caused this.

I removed the main hatch on my 1999 330DA to find the source of a leak. Pretty disappointed with how Sea Ray cut this deck. I would imagine they use a template or some sort of a jig to do this which means my boat is probably not the only one that has this issue. Unfortunately the water has been...

Hey guys, I have a 1999 33DA with a bad motor and was wondering if anyone has a recommendation for a company that sells long blocks. I pulled the heads and I'm not happy with the condition of the cylinder walls so I'm going to pull the engine and have a local shop look at it for a possible...

Does anyone know of a source for buying the "U" shaped rubber trim that Sea Ray used to finish off the bottom edge of the swim platform? They used it in other places also but I see it all the time on Swim platforms. I found it at Flounder Pounder but I think $6.25 per foot is crazy for a piece...

I have a brand new port side rail and stantions in original wrapper. I bought the whole rail set from Sea Ray for my 1992 370 Sedan Bridge but I only used the starboard Side and the front pulpit section so I still have the port side. I'm sure it's the same rail used on the Sundancer and it will...

I'm selling my 370 AC and I want it gone by the end of the season so I'm pricing it to sell now! This boat spent all it's life in fresh water until I purchased it three years ago. It has upgraded 380 hp Horizon inboards that were replaced in 2001 (500 hrs) along with new transmissions. The 9 kW...

I have an adjustable height salon table base for sale from a 37' Aft Cabin. Just bolt on whatever type table top you like and you're all set. $200

I have a factory Sea Ray port side rail and stantions that was originally ordered for my 1992 370 Sedan Bridge but will also fit a Sundancer from 1990 to 1994. Never used still in factory protective wrapping. Asking $400. Mark

I have the port side bow rail and stantions that I bought new from Sea Ray for a 1992 37' Sedan Bridge but it will fit other years and is the same rail used on the Sundancer. I bought the complete rail set for about $1500 but only needed the starboard side and front sections so I'm asking $300...

I need to replace the white flexible vinyl/rubber trim that finishes off the bottom edge of the swim platform. I've also seen the same material used on other parts of the boat so I know it's a pretty common item. Problem is that I found it on the Flounder Pounder website but just can't bring...

Does anyone have some real world knowledge of what kind of speed I should expect from a 1997 with 380hp Horizons? I just bought this boat and ran it from the place of purchase to my winter yard in Jersey which was an 8 1/2 hr trip. Started out at 3700 rpm doing about 14 - 14.5 kts because it...

Does anyone have a recommendation for what brand or type of waste line I should use? I want to replace the 1 1/2" hose that goes from the head to the vacuum pump because it's starting to smell. The original hose is the black rubber stuff but I want to switch to the heavy white vinyl type but...

This really sucks! The one thing I look forward to that gets me through the winter and we have two feet of snow falling.:smt013 I hope I can get there on Sunday. Anyone been there for a report??:smt089:smt100 Mark

I was hoping a fellow CSR member may know the best option for replacing an underwater exhaust outlet. I was cruising along the Maurice river headed to my winter storage yard when I hit a hunk of wood that knocked the port side outlet off.:smt089 I need to get a replacement and I'm not sure if I...

Okay, this is getting scary. My wife and I were out the other night with some friends in three separate dinghys when one of them got stopped by the State Police for his nav lights going out. To make a long story short, they took him to a nearby dock for a sobriety test which he passed and after...

Would it be a mistake to NOT recoat my bottom paint this year? I've alway used Interlux Fiberglass Bottomcoat on my boats and every year I would put a thin fresh coat of paint on the boat in the spring and I've always done it myself. I do everything myself. This winter I'm keeping my boat at my...