Search results

This is a like-new Norcold Fridge (De-0061). This fridge was only in the boat about 3 months before the brain box died under warrany, and I replaced it with another unit while I was waiting for it to be serviced. After getting the new brain box installed, the unit works fine and I need it out...

I hade a ding to fix, so I had the local DuPont store scan the side of my boat for a paint match. They told me if it matches an existing formula, the system tells them that. Well it matches Jersey Yachts White. I sprayed my ding with it, and it's a perfect match. Just FYI........

I got tired of dealing with points, condensers, dwell, etc on my Westerbeke, and I also got tired of Westerbeke oddball parts so I added electronic ignition to my 6.5BCG. Here's the parts I purchased for the project: 1 Pertronix 1632 igniter. This kit is not specifically supposed to be for...

I have a 6.5 bcg in my 390, and I'm having problems.....Several....1st, It seems that it only wants to put out 50hz instead of 60hz, it doesn't matter if I hook up the 50 or 60hz lead to the capacitor. I'm getting right around 50hz no matter what. I figured maybe my meter isn't working...

I had a leaking faucet on the front sink, so I figured I'd replace all three faucets on the boat. A few boat bucks later.....

I have a 6.5bcg in my 390. I decided it's time to replace the timing belt since I don't know that it's ever been done. Westerbeke claimed that they no longer had the timing belt. Several vendors confirmed this. I raised ten kinds of hell with Westerbeke about how there's no excuse for a gen...

Hey all, I have a friend that would like to track down a boat he had back in the lat 60's. It was a Rayson Craft drag boat that he ordered from the factory, and he sold it long ago, and lost track of where it went. He'd like to find it and restore it, if possible. He has the Hull Number, and...

I don't like it that sometimes there's a banner across the top of the page for match.com that has only pictures of dudes in it and apparently they're available. Am I giving off the wrong vibe?

Subject says it all. Sorry to post, but I didn't know any other way to get a hold of you.

Well, because the factory platform was deficient in so many ways, I've started building a new one for the 390. It's roughly 140" wide by 44" deep. I'm building the deck out of two sheets of 1/2" plywood laminated together. I cut the slots in it for the factory teak inserts because i like...