So first of all, my setup is like this: single AC unit underneath the v-berth. The water comes in through a pickup in the stern, into a strainer, then is pumped forward to the unit, and out a thru-hull in the bow.
To winterize, I was planning to use the AC pump to send AF forwards until I see...
2003 Select 200: Just opening everything up ought to do it but there is one oddity. I have blue circular handle, blue plug on thermo housing, blue plug on distribution housing at low point. No drains on manifolds or sides of block. I have been warned and plumbing schematic is complicated. The...
Hello, I been winterizing my boat which is a 1997 Sundancer with a 5.7 alpha drive for the last three years and this year things went very wrong. Usually I have my boat hauled out and put on blocks but this year because of Sandy and not being able to get my boat hauled out in time I decided to...
I have a brand-new SeaTech brand Plumbing Repair Kit as shown:
I purchased it from Defender.com (click here for info), and after attempting an install on another related product, realized this kit is made for PEX water lines that are 1/2"...NOT 15mm, so it's of no use to me!
Never...
i'm about to put the boat up at the end of this month till may and the place I store it asked if I wanted to acid wash the bottom. The boat sits in freshwater all season and will be power washed when it comes out for storage, but i wasn't sure if I should pay the extra for them to acid wash as...
I am a proud new owner of a 1999 290 Sundancer DA with 400 hours on it. I took delivery on the boat this past weekend which was very exciting! After a short cruise I went to work winterizing the boat. The boat is moored in Tenessee in the water. The boat came with all manuals and documentation...