Beech2000
Active Member
- Jul 11, 2015
- 255
- Boat Info
- 1990 Sundancer 350
- Engines
- 2020 454 gen VI
Hurth V-Drive's
7.1 KW Kohler 5ECD
I have two indicator lights on the panel for bilge. One is red (Bilge on) and the other green (Bilge Auto). I replaced the inoperative lamps and installed a new helm switch.
When selecting bilge pump on the red light illuminates.. I assume this is normal. Where does the green lamp (Auto) connect to besides ground?
I have three wires to the switch and no other wires found in the area.
ribbon
brown
brown/with red stripe
single
black
Could I have ordered the wrong switch?
The one I pulled was simply a single pole single throw.
I'm thinking I should have ordered a single pole double throw style. but then how is it wired?
I have not located any accurate schematic for my classic 90 sea ray 350 sundancer.
When selecting bilge pump on the red light illuminates.. I assume this is normal. Where does the green lamp (Auto) connect to besides ground?
I have three wires to the switch and no other wires found in the area.
ribbon
brown
brown/with red stripe
single
black
Could I have ordered the wrong switch?
The one I pulled was simply a single pole single throw.
I'm thinking I should have ordered a single pole double throw style. but then how is it wired?
I have not located any accurate schematic for my classic 90 sea ray 350 sundancer.
