I want to convert this phone jack to a double usb to charge phones. I have searched the internet and can only find a single. Does a double exist?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Are you sure?…. I think this is what I have, the frame pic below and didn’t think there was a place to clip two in the frame…. I think I need to take apart and see.@Blueone You need to remove the phone jack and the 2 half spacers on each side of the phone jack. Then you should have room for 2 Vimar USB’s side-by-side.
Yeah, that’s not gonna work. Sorry about that. What I did on my boat is remove the center blank from a 2 electrical-outlet and put the USB in between the 2 outlets. You need 120v anyway, so the splicing is easy. You can essentially put USB ports wherever you have an electrical outlet. I have one in the MSR, GSR and galley.Are you sure?…. I think this is what I have, the frame pic below and didn’t think there was a place to clip two in the frame…. I think I need to take apart and see.
View attachment 118325 View attachment 118326 View attachment 118327
Are you sure this https://www.vimar.com/en/int/catalog/product/index/code/20295 wont work if you take those 2 pieces out just inboard of the 2 screws in your pic?Are you sure?…. I think this is what I have, the frame pic below and didn’t think there was a place to clip two in the frame…. I think I need to take apart and see.
View attachment 118325 View attachment 118326 View attachment 118327
Well that might work too. Single in the phone plate and a single in between the receptacle next doorYeah, that’s not gonna work. Sorry about that. What I did on my boat is remove the center blank from a 2 electrical-outlet and put the USB in between the 2 outlets. You need 120v anyway, so the splicing is easy. You can essentially put USB ports wherever you have an electrical outlet. I have one in the MSR, GSR and galley.
I don’t think that will work. It is the Eikon series, and Sea Ray uses the Idea series. I suppose you could by an Eikon base plate and cover plate, but it wouldn’t match. I’m under the impression Blue wants to use the basic setup that he has.Are you sure this https://www.vimar.com/en/int/catalog/product/index/code/20295 wont work if you take those 2 pieces out just inboard of the 2 screws in your pic?
No… not sure. I think I will take the two apart and check out the double closer ….Are you sure this https://www.vimar.com/en/int/catalog/product/index/code/20295 wont work if you take those 2 pieces out just inboard of the 2 screws in your pic?