NateVancouver
Active Member
- Apr 11, 2019
- 129
- Boat Info
- 1995 Searay 370 Sundancer
- Engines
- 454 Mercruiser
Here is tv and mount got it for 350$ 50 inch roku. 4k fits perfectly.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Here is tv and mount got it for 350$ 50 inch roku. 4k fits perfectly.
Here is some lighting ive done..
1995 370 sundancer DA.....looking for anyone who might know where to purchase camper canvas online...I am told some companies might have my years pattern and we can buy direct...thanks
So looked at a 98 today.
1. Carpet runner replacement -- anyone online have the pattern? The ones on the steps have seen it's better days, starting to tear.
2. Front eisenglass replacement. The front panels just don't fit right. They actually look like they are for another boat as they have a rubber track at the bottom by the windshield (seems out of place).
3. Engine room access is awesome. Still need to loose a few lbs. to fit between them. But jumped down and could move around. I understand the side panels come out to reach the generator and such. Question is, is there enough room with them out to replace what is under there (genny, tanks, water heater, etc?) without removing an engine? How hard are the panels to remove -- one man job?
4. Small overhead light in the head -- It has dropped down. How is that mounted? Missing a screw?
5. Best refrigerator replacement for the cockpit ice maker?
They list the 1996 370DA, but be aware that the arch height was different from 95-97 and 98-99.Golfman25,
Try boatswains-locker. The 370DA was a Merritt Island built boat. Sea Ray did the canvas on the 95-99’s. Boatswains-locker did the frames only. They have some patterns as the owner’s of the boats found the patterns left from the factory on the boat. I think they have the ‘98, but give them a call.
https://www.boatswains-locker.com/factory-replacement/
I actually read that as 1996-2006. But it's not really clear.They list the 1996 370DA, but be aware that the arch height was different from 95-97 and 98-99.
Nice find. I see the PO took the striping off the hull and house. I've done my hull, the cabin top is next. I actually have OEM replacement decals and striping, but I doubt I'll ever put them on. Naples is a great place to have that boat, too. Nearly everything on the West Coast is within range.Just purchased a 1998 370 7.4 MPI 550 hrs, Pretty much original,View attachment 88946 going through all the systems and changing all the bulbs to LED.
Finally got through the whole 370 thread. Lots of information Thanks. Just wondering if anyone has made it easier to access the storage under the Settee. moving both cushions and the plywood base any time we need to get in there is a hassle. Has anyone made access so you only have to remove one cushion and maybe split the plywood somehow? Would like to make it more user friendly. Yes that thing on the arch has got to go. There at one time was a TV dome mounted there that the previous owner took off. for now the radar will stay as even though its dated it works just fine and will still pick up sea gulls flying.
Thank You for a great thread!
I am guessing you are speaking of the mid cabin (the one in the back)? The 2 center cushions come out (no where to store on board), then the 2 pieces of plywood slide out towards the salon, and then the aluminum cross member lifts out. I store those 3 pieces under the port seat in there. They slide right in and lay on the floor of that compartment. Then I have 10 or so life jackets stored over them.Thank you.
I keep the boat in Algonac MI. I do not plan on hitting the salt just yet. Maybe some day, but for now wanted to be able to cruise great lakes and north channel. Using it as a summer cottage live aboard. Was originally looking for a 42/44 but my well wouldn't fit it and found the 37 has almost as much room without the added expense of a well upgrade and winter storage.
Has anyone removed plywood under the cushions on the settee. We don't plan on using it as a sleeping area and if we do can reinstall it. May try and mess with it some when I get back to MI.