Peter G
New Member
- Nov 9, 2020
- 17
- Boat Info
- 2001 480 DB Sedan Bridge
- Engines
- 2 x Caterpillar 3196 660 HP
So, still working on rainwater leaks. Before I tackle the windshield I thought I would caulk all the obvious places that the caulking was lacking, so here is what I'm currently doing:
The top red arrow is obvious that it needs replacing (as well as the bottom arrow, but there is a question, below).
The bottom of the two ancient caulk lines up close:
Yeah, so I need to scrape that out and replace it. Seems to be actual caulk or putty (not silicone), because it is messy under the crust.
BUT HERE IS THE ACTUAL QUESTION: Should that caulk extend all the way around the the boat above the windshield? I don't see any evidence of antique caulking. (The lower area between the two fiberglass panels.)
Please don't judge the dirtiness, I moor under a very active flight path. NAS Oceana
Hi SeadawgVB, not sure if anyone responded - My 2001 480 DB Sedan bridge (which looks very similar in configuration/build) has caulking all the way around this joint - hope that helps