Recent content by Libby718

How do you open the ER hatch without power. The 8.1 manifolds are in the way and the pull-pin to release the hatch from the hatch opener shaft is wedged too tight to release.

Thank You I did not try that with my 260 which was kept on a lift and drained every time it was raised. It wasn't that hard to get in the ER to the seacock, but this is a 340 with 8.1s. I would like to stay out of the ER even with a pole. Force priming while underway is a great solution I had...

Greetings We are moving to Bradenton Fl. and my 340 will be on a lift. How do I keep the A/C water-pump from draining its water causing a vapor lock and a prime ? In June or July I will be taking the Mississippi River and Tenn-Tom waterway to Mobile Al. and then the ICW to Bradenton. More...

Considering upgrading my batteries, charging system and addding a inverter-charger. I like having a remote control with charging and battery monitoring offered with the newer units. I would like to increase the house batteries so I can run about 500 watts for several hours without running the...

Replacing the glomex antenae with KVH M1 on my 2002 340 Sundancer. The Glomex arch mount is a round mount slightly recessed in the arch. Can I use the existing pole mount of the Glomex or do I have to buy the vertical mount from SeaView? I am aware that I need the bottom plate for the M1, but...

I am ,as of May 28, the main financial contributor to a 2002 340 Sundancer. I wanted to replace the aft bilge pump, aft high-water bilge pump and the float :smt100 witches. I need help with the wiring. There are four wires to the high-water float switch and pump, I have identified the two power...

Re: Gold Pinstriping tape I need about 10 ft. of the 1/4" gold stripe and the 1/2" black stripe. I don't want to buy the 150 ft. roles at over $32 per role. Any help out there !

Any suggestions on replacing engine room blower with one thats quiet.

I need sugestions on where and how to run #8 gauge wires from batteries to bow rode storage locker on a 2001 260 Sundancer. Thank You :smt017

I am looking into installing a windless. While looking in the rode locker, I found in the black plastic conduit a fairly large white wire which to me looks like household Romex wire. This wire appears to run inside one side of the locker and out the other side. I did remove a panel in the...

I have a Clarion CMD4 AM-FM CD player. I get a lot of static when I am listening to AM radio. I have got to tune into 1120 am so I can listen to the World Champion ST. Louis Cardinal baseball games. The static is unbearable. Please help. GO CARDS

I have a 2001 260 Sundancer with the original 7000btu Cruisair air-conditioner. Does anyone have any experiance with using a Honda EU2000i to run this size of a/c. Please no responses about the dangers of using a portable gen. I am well read and fully aware of the complications and dangers...

I should not have posted my name and phone number. Will you please delete my name and number. I am sorry for the trouble. Post date and time is the same for this message. Its in the classified adds for parts. Thank You

These are the correct size for my 2001 260 sundancer. I need four but this will save me $80.