Recent content by SR450EB Captain

Nicely done, I ordered replacement caps and did the same thing only I used them for blowing out the through hulls and winterizing.

YES SO SAD TO SEE THIS! Glad all are safe!

I purchased an addition TV Mount base/receiver so the same TV could be used in the cockpit or at the helm. Will also feed an HDMI and use as an additional monitor when I update my electronics. This is the location chose at the helm seems to work pretty well. I may have an extension made so I can...

Waaaaaaait for me!

I modified the mount to route the 12volt wire through the stainless steel tube. I mounted a 12 receptacle inside the starboard side rear locker w/inline fuse. Ran shielded wire over from the receptacle over to the main battery buss on the house battery.

Running on Roku and a ATT Hotspot, chose Roku so I can stream through my boat sound system via bluetooth.

finished up the 12v dc TV Install. Pretty happy with the results.

I have seen a couple pics of 450EB with AC vents at the helm. Seems like some one once told me they duct air to the helm for the mid cabin. I have looked through my manuals and on Searays online resources but haven't found a schematic. Anyone have any experience with this?

I agree my buddy in the slip next to me has a 2000 38 SR Aft Cabin they do look similiar but I believe slightly shorter and installed inverted as I recall. Perhaps the larger aft cabins are the same. Below is a pic of the 2001 420 AC, looks spot on Searay 2001 460 Express looks a bit different

Yes it starts with a 3D scan and/or he could model it up manually if he had the part. Wonder if SeaRay would have/share their file? Furthermore THIS IS A BIG PART to 3D print. Not many shops have the ability to do this big of a job and the finished product would then have to be preped and...

I am on the boat this weekend and will snap a pic of the lower numbers as post accordingly.

He is pretty busy making custom teak tables in his spare time but I will gladly ask him if he interested in printing up another set and get you a price, I know they took a lot of material to print as I recall each one took 32 hours on the printer to get the best surface quality. You would have...

Yes 3 stateroom layout.....my hull numbers are SERP4828B001

Jim......lol you don't miss a thing, yes these are speaker pods on the front of my boat. My son and I designed and printed on his 3D printer.

yes just kind of a catch all space in the middle