370Dancer
Well-Known Member
- Oct 2, 2006
- 2,489
- Boat Info
- 1998 370 Sundancer
- Engines
- 380hp MAG MPI Gen VI with V drives
The can to the underwater exhaust is 5", so I'm sure it's the overboard ones. that hose is real stiff, but doable. You will be aft of the genset and aft of the Vacuflush head tank, in an ugly to get to part of the boat. If you are going all in, let someone else contort their way to the hull. The water lift side is a walk in the park. Shields 1/2" is 9 bucks a foot at WM, and 2.50 at go2marine.com. Gotta factor in shipping though, but may be able to factor out tax. Don't think you would need more than 20' to do both sides.
If he didn't mention fittings, he'll be reusing the old ones. He will likely not be using push on hose, so there will be clamps. I think even my factory setup was like that.
My analysis is 80-90% of that $1600 is labor, but labor doing less than fun stuff. All in all, I'd write the check, but help him source his parts.
If he didn't mention fittings, he'll be reusing the old ones. He will likely not be using push on hose, so there will be clamps. I think even my factory setup was like that.
My analysis is 80-90% of that $1600 is labor, but labor doing less than fun stuff. All in all, I'd write the check, but help him source his parts.