Trisha
Enjoy the boat, This thread and Kevin are a great place for learning and replacing most parts of the boat. I have done it piece by piece lol
Kevin recently tried to help me find an intake manifold, which I thought I needed when my engine hydro locked. Turns out (after finding one)...
i believe most if not all automobile parts are aluminum.. This needs to be cast iron as the boat is raw water cooled.
Here is a link to the part https://www.perfprotech.com/m-fold-asy-intake-860100a2/product/185496
or here...
I have
5.7L throttle body cast iron
I dont believe a car part would work for this, as this part was made specifically for this engine by mercruiser and was only manufactured from 1999-2002
Thanks
I hope someone can help.
I am in need of a Mercruiser/Quicksilver manifold intake OEM 860100A2
Mine has failed and is no longer made.
Any help would be greatly appreciated.
Thanks
Gerald,
I used these last year:
2ea Leer Truck Tonneau cover gas strut spring lift 19.69" extended length x 12.2 " compressed length x 120 LB Pressure
Here's the link https://www.amazon.com/gp/product/B01KABJTJQ/ref=ox_sc_act_title_1?smid=AZQP4CQ74U96G&psc=1
Really not much to look at. I cleaned out the rot, then cut a few pieces of plywood to size, painted it white and stapled it back in. I did this about 3 years ago. The wood rotted due to the port window leaking (yea I removed and re-caulked them the year before).
This weekend the horn...
Remove the whole cabinet and repair or replace whatever you want. I did mine 2 years ago. I removed some of the rot and added a few pieces of plywood. Microwave held in by 2 screws on the top of the cabinet.
I posted this on another thread but I thought I should repost here. I replaced my quack horn with a Stebel 11690019 - Nautilus Compact Mini Air Horn Black. About $27. You can search on Amazon for it. So far I highly recommend it. No more quack. A real air horn sound.
I replaced my quack horn with a Stebel 11690019 - Nautilus Compact Mini Air Horn Black. About $27. You can search on Amazon for it. So far I highly recommend it
Update:
The lower track was separating from the door at the bottom. I drilled a small access hole and put 5 new screws into the door and track. I could place an access hole where it is not seen. Success. The door slides great now.
Had the marina splash the boat today, however, they said...
The passenger lounge seats were removed from below. A few were bolted in place from the bilge , however most were bolted from below in the aft cabin. I had to remove part of the headliner and the wall in the aft cabin The wall with the mirror on it. Reach up and you can find the bolts.
I...
I just removed all the seats and cushions and am having them re-upholstered. I am also replacing the speakers ( they were really rusty and had lousy sound). Last week I replaced some of the wood in the microwave cabinet that rotted away from the leaky port window.
Hi All,
I have been reading this thread for a few years and I want to thank everyone here who has participated. I have done so many of the repairs recommended here that your experiences have been invaluable. Fixed the port window leaks, caulked the leak between the floor and the wall...