Thank you.... The boat has 230 hours and is a 2007 model and I think sat for a while before we picked it up. Anyhow after several issues finally had it running like a dream. I came across the lake at about 5000 rpm and throttled down and it stalled, fired right back up and idled fine. However...
Just did mine the other day....Drain plugged worked great albeit very slow however the filter was another story ! Whoever put the last filter on it must have used an Impact gun !! Finally crushed it enough to get large channel locks around the beast and remove it
Purchased a 185 Sport boat and it is missing the strut to hold up Ski Locker.... Can someone please grab that measurement from mounting point to mounting point.
Thank You,
BobH
Well finally got around to make time for this boat. New starter works fine. Pulled carb and found the float level was about a 1/2 " to high. This has been a lot of aggravation however it forced me to learn my way around the boat. It runs really well now and pulls strong out of the hole.
Now...
I just had the thrill of changing a starter on a 4.3 185 Sport... It was tight area however once I removed all the partitions and stowed items it was at least manageable.
Good Luck,
BobH
They used Velcro from Sea Ray. I bought a roll from Lowes and replaced mine. BTW Mine cushions need repair. How did the color match come out ?? Pics if you can
Thanks
BobH
Good Luck on your search.. One thing that scares me in an old boat is the wood rotting. I think the Sea Ray went all glass/ composite around the 2000 year models. I'm sure there are some experts on here to clarify ( one way or the other )
Good Luck,
BobH
same w/o plugs.. tries to crank for a second then click from sol thereafter . I did a batt svc , cleaned all connections , charge batt. did voltage drop with ignition in start/crank position. also did rap on hammer while engaging starter. thanks for the help
Thanks Dave.. I Don't think the fuse/CB is at fault. I will take a another look at that before I pull starter. Currently it will engage and maybe give a groan and solenoid click as it tries to rotate. As a precaution I pulled the spark plugs just in case it was in a liquid lock. Thankfully it...
Add insult on to injury. Moved accelerator pump arm to highest hole. Went to start and starter failed, great ! Just got this boat also maybe I've got an hour on her. Not building a trustworthy relationship ! It 223 hours
Thanks for the replies . I wont be able to check things for a week . Will update when this is sorted. I did richen the mixture without any positive results. The boat will fire right back up and idle smooth but when you try to add throttle it will stumble and stall
Thanks , I had considered the accelerator pump. I didn't know it was adjustable. Yes the Merc 2 bbl. I will give it the adjustment (Once I find a good parts breakdown )
Still wondering about fuel pick point filter/sock/ ?
Thanks Again,
BobH
Found a manual...
I have a 2007 185 sport with carb, and 4.3. The boat runs smooth achieves rpm except when coming off idle. There it stumbles and if you catch the throttle , you can pepper it and get it going.
The boat only has 223 hours , It had the carb rebuilt before I picked it up. I replaced the...
As stated above …. Does anyone know what year the entire boat was fiberglass constructed ??
In particular NO WOOD in the floor area on the 175/185 models
Thanks A lot,
BobH
Thanks for the responses. Looking forward to do something other than the lakes. Will be bring skeeter repellant for sure. I went up Crystal River one time and was attacked by those No-See;ums, it was miserable
BobH
Looking do a day trip out to the key. What is the best/closest ramp to drop the boat in?? Also while looking at the map it appears that the west side of the Island is the best place to anchor?? Any / all suggestions are welcome.
Thanks
BobH
Took the boat out the other day and noticed the depth finder was accurate with the motor off and key on..... Is there a common place that maybe providing electrical interference? My transducer is located in the bottom of the hull about 4 feet from transom
Thanks
BobH