Search results

google "2014 marine speaker review" and they do appear in the top ten

Janice found out that her dog (a Schnauzer) could hardly hear, so she took her to the veterinarian. The vet found that the problem was hair in the dog's ears. He cleaned both ears, and the dog could then hear fine. The vet then proceeded to tell Janice that, if she wanted to keep this from...

yes, Friday night as well...gotta check out deckadence marine flooring (deck replacement) Tom

Arm up will stop making ice cubes, but not affect compressor operation. My breaker for ice maker is same as fridge. If ice maker is still cold then compressor is likely working fine. This year mine would intermittently stop making cubes, replaced ice cube section and it was back to 100%. Tom

95,84,59,40

Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread question about a 2000 410 express which needs compounding. The Sea Ray specs etc state gelcoat is "Arctic white" but was there other colors available? We did a test area and it came up a light sand color...

Hi.... My friends 410 has for 3 years had intermittent exhaust water flow issues...impellers were changed with no difference....water flows for a short period of time (a few seconds) then stops then water shoots out and repeats. there are no temperature problems. Any ideas what might be causing...

Rollercoastr....Do you have pics? and list of changes that you felt were big improvements...looking for ideas, as mine is due soon Thanks, Tom

Todd, I'm in for a pair as well....great idea! Tom

Saw a flexible trim that is designed to bend like that, at our local building center...don't recall name of it but can find out details for you as I will be there today anyway. Tom

Hi... did some experimenting this summer on our summer vacation in North Channel area with trawler speed and normal 2400rpm cruising..... 1350 would work out between 9.5 and 10 mph depending on water conditions....on one tank for a 20 mile trip(and other similar legs) we travelled 10 miles at...

We use Rocna anchor(made in USA) check out videos at rocna.com. Amazing holding power...our Dancer was in middle of two boats, an early nineties 310 and a 340 which also had a danforth out. A squall hit us, the wind shifted 90 degrees almost instantly to 60mph. The Rocna bit within a few feet...

Hi....is there a particular brand or supplier for Sea Ray in mid nineties to try and get a close match color wise?

Used to see Miss Jaquelin in our parts on way up to North Channel and used to travel with another Big 55 Ray Lots o' Letttuce. Recall seeing the Arneson drives on Miss J. Beautiful ship!!

Yes, positive and props are 22x24 which I believe is standard Sea Ray size for the 97 400DA. Max bare idle was checked as well 3150...

My 3116's seem to create quite a bit of transom soot. Boat does achieve 3150 RPM with full fuel,half water and usual admiral stuff(digital Aetna tachs). Would it be prudent to assume the soot issue dictates that the aftercoolers should be cleaned or also do above mentioned differential pressure...

Some Georgian Bay and North Channel Pics...

Ken....please elaborate on fuel line problems, as friend has same boat and CATS as you....much appreciated, Tom

Jim....done,good luck!

Baby I Need Your Lovin - Four Tops