Looking for advice on what to check / change. My starboard engine analog oil pressure gauge is reading low at high engine RPM. It reads correctly at idle, but once engine speed increases above 1500 or so the oil pressure gauge needle drops closer to 0 instead of increasing closer to 50+.
I know...
2002 340 Sundancer w/Westerbeke 4.5 BCGB <-- ~1200 hours.
Generator runs normally (as it has done the last 7 years that I've owned it) and then suddenly just shuts down. It will run 4, 5, 6 hours at a time, then die and won't restart. The next weekend I come down to the boat it does the same...
Does anyone know what height the risers are on a 2002 340 DA with raw water cooled 6.2 MPI engines and V drives? I've got an oil leak at the rubber to metal crimp on one of my remote oil filter hoses. It's dripping into the bilge and making a mess. I would like to order the hose and have it for...
Anyone willing to loan or rent a Techmate Pro w/94006 adapter?
Only needed for 1 week. I just need to program my port engine from starboard to port, and read the hours/RPM history.
Guy on Ebay was renting them for $75 but seems he quit doing that back in June.
My brother is looking at a '01 340 DA. The tachs show approximately 6 hours. The owner says one of the tachs failed and he replaced them both a couple of months ago. He also showed us the failed tach and the one working tach that was removed. The working tach shows 511 hours when you hook it up...
I've read all of the threads on switching from 3 to 4 blade props on the 330 / 340 size cruisers. Mine is a '02 340 DA with 6.2 V-drives (year before they switched to the new-style, wider beam 340).
I'm just about convinced to make the switch, however I need to know if my current props are...