Search results

Picture attached (marked in Red)

Hi, We are looking to wrap the interior fabric seats with marine vinyl and not sure how to wrap the head rest or take it off. It is attached with no visible screws and wondering if anyone has an idea how to remove it. Boat is 96 270 sundancer. Much appreciated :)

Reset the hydraulic lines back to normal. Eliminated the option that the drive may be jammed and jumped the solenoid. The trim switches are fine. The only one left now is the pump. It is running but the drive is not moving down. Up is fine

Strangely, jumped the solenoid today by connecting the red positive to the green wire. Trim pump activated but the drive didnt move down. So pump could be the issue ?

So, today i reversed the hydraulics at the pump ( changed up to down and down to up ) , pressed the up button and the drive came down. Atleast now the boat runs and it need not be pulled out. This also rules out the drive may be jammed option and now i think it boils down to solenoid or the pump.

Thank you, when the down button is pressed the trim motor works which could potentially rule out corroded wire issues from throttle control.

Hi, Bravo 2 drive does not trim down and here are the symptoms. Please let me know where to start troubleshooting. Boat is in the water and hoping that there is a fix for this without having to pull it out. 1) The 'trailer button' works and drive came all the way up. 2) When the 'up button'...