Search results

The boat that is picture what size motor in it and what kind of prop do you have on it. thank you john

I have gas coming out on to the water and would like to know where it is coming from. It is getting out some were anyone have an idea as to where. thank you:smt024

Here is more information on my boat, the prop I have on now is 15x15 prop. My object is to be able to get up on plane and then ideal it back to where I am running on just two barrels of the carberator so that I will be burn less fuel and get better mileage. 15 in dia. prop is the largest I can...

Here is more information on my boat, the prop I have on now is 15x15 prop. My object is to be able to get up on plane and then ideal it back to where I am running on just two barrels of the carberator so that I will be burn less fuel and get better mileage. 15 in dia. prop is the largest I can...

Here is more information on my boat, the prop I have on now is 15x15 prop. My object is to be able to get up on plane and then ideal it back to where I am running on just two barrels of the carberator so that I will be burn less fuel and get better mileage. 15 in dia. prop is the largest I can...

I have a 1985 sea ray boat with a 350 chev engine. What I want to know is, has anyone try a four bladed prop on their boat of the size. I want to know if they get better gas mileage with the four blade prop. thank you john:smt038

Thanks for the help, what I have seen from your replys is: 1 Clean the bottom of your boat. 2 Check the pitch of the prop. 3 Check to see if your fuel pump is puting out to much pressure. Keep your idea coming thank you johnjm1234

My boat uses alot of gas how can I enprove the mileage on it. The boat is 1985 Sea Ray with a 260 merc Courser engine which is really a 350 chev engine. It has a four barrel carberator on it. I did find out once I get up on plane if I run it 3200 rpm that it will run on the two barrell but if I...

I have a 1985 sea ray and built into the dash is a impluse depth finder. It is two inch in diameter and on the front of it, has two control bottens one has word up and the other has word down on it. I would like some information on how to operate it. If you have some please send to me thank...

don't know how bad it is just getting into it. thanks for your comments keep you posted. john

I have a 1985 sea ray with a 260 mercruiser engine, the model is MCM 260 Displacement 350CID RPM 4200-4600 I'm looking for a rebuilt engine to replace this one. If you know where I can locate one, I would appricate the help :smt038 thank you

I to have a 1985 sea ray and have done alottttttttttttttttttttttttttttttt of work to it Here are some pictures of it. I put all new sliding door in it. Make the back seat from a picture and redesigned from there. Hope this helps. I tried to down load some picture to you but a note came up and...

thank you for all the help johnjm1234

I have a 1985 sundance sea ray which I bought used. I'm looking for a manual for the "John" :thumbsup: It needs some parts and I not sure how it work. Its a aouamate by thetford corpation :smt043 On the bottom part of toilet, at the back and on the right side there is a circle cap with to holes...

:smt038 hi , I have a 1985 sea ray which I am restoring hope to geat it in the water this year. Its been a big project but rewording one. I live in Iowa and plan to use on the Mississippi River Almost there again welcome John :thumbsup:

I would like information on the correct procedure on putting on new strips on my boat. I have removed the old strips with the 3M wheel. It work fine but there seems to be a little surface left on the boat,:huh: is this some glue from the tape. If so what do I use to remove it. Next, I know you...

I took the teak wood railing off and wash and sanded it. Then put a oil that was made for teak, it look great for about two weeks then it started to look gray again. So I just started to put more oil on it. It didn't make it any better. Then I read about a product called teak guard, they have a...

good job on the stripping can you tell me where you bought your stripping and how much it cost. thank you

I bought a 1985 sea ray on ebay, the pictures he showed did not show the true condition of the boat. I was disappointed when I say it. It needed a lot of work to clean it up which I am still working on it. I know you are asking about selling on ebay all I can say is do a good job of showing...

:smt100Looking for a radar arch that will fit my 1985 sea ray boat. Would like name or email address of salvage yards where I could check. :smt038 thank you