1987 340 for parts

[Chopperdr.]

I’m looking for a rod to hold the forward hatch on for my 300 Sundancer. Do you have any of that hardware? Also, the wheels from my slider hatch going cockpit to cabin are bad. (One is missing). Not sure if you have good hatch seals for the front hatches? Do you have a windless still?
ive problems ordering this stuff because of covid and lack of dealers covering it anymore. If anyone has a site to recommend buying this stuff, I would appreciate it.
Also, location?

I have the windless .I have the hatch rods .I might have the rollers for cabin door I'm in Mississippi

 

[Cbird]

Ok. Great. How much for the ladder and the table pole. Small section.

 

[Chopperdr.]

Ok. Great. How much for the ladder and the table pole. Small section.

Not sure which pole your talking about make me a offer on them I dont really know

 

[Cbird]

Not sure which pole your talking about make me a offer on them I dont really know

It's a ten inch pole, silver with groves that goes in between the table and the legs. It is used for when you convert the dinette into a bed to support the board that slides out over the opening. There should be two poles one is around 26 inches and the one I'm looking for is ten inches.
I'll give you $30 for the ladder and mounting brackets and $5 for the pole.
Not sure what shipping will look like. My zip code is 49426 if this helps. Standard ground will be fine. Let me know. Thank you

 

[Chopperdr.]

39066 is my zip I guess I can do the 40$ total plus shipping do you need anything doesnt matter how small i might have it.

 

[Cbird]

39066 is my zip I guess I can do the 40$ total plus shipping do you need anything doesnt matter how small i might have it.

After thinking about it some more. The only other things I need are the hose and attachments for the central vacuum system and the original coffee maker. My boat is a 1991 sea Ray Sundancer 350. Not sure if the boat (s) you are pulling from will match but again, pictures are always helpful. Thank you

 

[Chopperdr.]

After thinking about it some more. The only other things I need are the hose and attachments for the central vacuum system and the original coffee maker. My boat is a 1991 sea Ray Sundancer 350. Not sure if the boat (s) you are pulling from will match but again, pictures are always helpful. Thank you

I have a 87 340 and a 1994 330 I'm going through it's been sitting for a while.and a 1969 pachanga that was a total rebuild

 

[Cbird]

Do you have the vacuum hose and attachments from the 330?

 

[PinaPants]

I have the windless .I have the hatch rods .I might have the rollers for cabin door I'm in Mississippi

i will have to measure my hatch or the hatch rods. I’ll take them both if it’s the same. Do you have a Sundancer or Weekender? My Sundancer cabin door slides to the front of the boat. Does the windlass work?
What kind of price are you looking for? I would like the switches, relays and maybe even the circuit board for the windlass if you have it all. Zip 43201

Will PM you an email.
Nick

 

[BRIAN RANDALL]

What condition is the cockpit door down to the living area? Does it fold up or slide to the right? If it folds up, let me know cost and send photis.

 

[Chopperdr.]

What condition is the cockpit door down to the living area? Does it fold up or slide to the right? If it folds up, let me know cost and send photis.

Slides to the right and cracked like most of them

 

[Chopperdr.]

i will have to measure my hatch or the hatch rods. I’ll take them both if it’s the same. Do you have a Sundancer or Weekender? My Sundancer cabin door slides to the front of the boat. Does the windlass work?
What kind of price are you looking for? I would like the switches, relays and maybe even the circuit board for the windlass if you have it all. Zip 43201

Will PM you an email.
Nick

Did you get pics of windless

 

[Drifter22ft]

I’m looking for all the hardware for all the front hatches if you still have them email me davemathurin1862@ gmail .com

 

[Chopperdr.]

I’m looking for all the hardware for all the front hatches if you still have them email me davemathurin1862@ gmail .com

Which forward hatch do have a pic.you can text me at 6919063193

 

[Drifter22ft]

Can get tomorrow will text you then

 

[Paul bfield]

Looking for a mercruiser quicksilver top and bottom binnicle cover for duel throttle please
Postage to qld Australia

 

[CaptWilly]

Do you still have the canvas/scaffolding? I'm looking for a camper-back style.

Thanks.
CW

 

[Dave4562]

Hi,
What do you want for the generator and the fiberglass pedastal. I have a 390 EC.
Do you have the measurements for them.
Thanks
Dave

 

[John Grantham]

1987 sea ray 340 parts everything but engine blocks and exhaust.blue canvas enclosure transmissions hatches let me know if you need anything.

good afternoon my name is John Grantham and I'm looking forward to sliding glass that goes in the 34 ft Sea Ray Express cruiser.
The canvas that you got is a is it a camper styles

 

[John Grantham]

1987 sea ray 340 parts everything but engine blocks and exhaust.blue canvas enclosure transmissions hatches let me know if you need anything.[/QUOnia I'm looking for the sliding plexiglass door on a 34 ft Sea Ray 1988 for a Express 1988 would you have anything similar to that that can be replaced