340 aft cushion that connects the benches (pic attached)

[Horton177]

Two questions, anyone have dimensions to have a custom one made or know where to find a reasonable replacement? Mine is MIA.

Also, doesn’t the table set under it to support it? If so I guess this guy just bought a second table.

Thanks,

 

[Skybolt]

There should be two rails that hold that bench piece in place. The dimensions are simply length x width x thickness and you know all of those from what is there.

The table goes under the engine hatch in that holder, IMSMC.

 

[Horton177]

There should be two rails that hold that bench piece in place. The dimensions are simply length x width x thickness and you know all of those from what is there.

The table goes under the engine hatch in that holder, IMSMC.

I guess i'm missing the rails then. I was under the impression you took the aft table and placed it down to set the cushion on top. New to me boat so learning things i'm missing.

 

[Golfman25]

Two questions, anyone have dimensions to have a custom one made or know where to find a reasonable replacement? Mine is MIA.

Also, doesn’t the table set under it to support it? If so I guess this guy just bought a second table.

Thanks,

There is a small plastic piece that goes across the gap between the two seats. Pad goes on top of that. Some people fit a cooler with a cushion there Instead. Fits good.