Island Time Buffalo
Active Member
(Also posted under electronics, but trying to get some responses)
Came home from a long trip where we stayed at no fewer than 8 different marinas. No unusual power issues.
Get to home marina after a 4-hour lake run, plug in shore power, and BAM..... breakers blow immediately on the pole when ANY load is placed on it. Normally I run a single 30 amp to a dual 30 Y-cord, so I pulled out the Y and....
Tried:
Running with two 30 amp cords to multiple poles.
Tried each 30 amp input by itself, and switched cords and stanchions.
Moved to another section of the marina and tried their stanchions.
No go.
Everything DOES run on the generator without tripping anything.
Any ideas where to even start?
Came home from a long trip where we stayed at no fewer than 8 different marinas. No unusual power issues.
Get to home marina after a 4-hour lake run, plug in shore power, and BAM..... breakers blow immediately on the pole when ANY load is placed on it. Normally I run a single 30 amp to a dual 30 Y-cord, so I pulled out the Y and....
Tried:
Running with two 30 amp cords to multiple poles.
Tried each 30 amp input by itself, and switched cords and stanchions.
Moved to another section of the marina and tried their stanchions.
No go.
Everything DOES run on the generator without tripping anything.
Any ideas where to even start?