410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread**

Bringing back the carpet to the top, finally pulled it out and took some pics. It is brand new, there are a few wrinkles from being rolled up. It is a light gray with just very faint hints of tan but mostly gray light gray. It also had rubber backing

looking for $450 shipped. Pm if interested!

D5F4801F-995F-4553-932C-C021D70F2558.jpeg
3C86DAF0-071D-4B57-8DF7-A74A12FFABEB.jpeg
B9C31FB8-AD80-468F-A1B8-6AF61919C388.jpeg
 
Ryan, if that would fit my 98' 400 I am all in, but I think the side by the sink is different. That is exactly what I had on my last boat and really liked it.
 
jzizler said:
Most of the gold is gone now with the exception of the decal on the front of the sink in the cockpit area.
Click to expand...

Nice. I think that stripe is the only gold remaining on mine. Save the best for last :)

I don't think I have gold on the sink area? Hard to see here but it's mostly black?

49635672533_43099be29f_b.jpg
 
Another little update today since it was pouring down rain and I couldn’t continue buffing.

the old shower boxes were gross, and to me it’s one of the things I just “do” on a new boat. For a couple hundred bucks it was worth it.

ignore the gaping holes in the floor, those were cut to get some water that I discovered out and I’ll be patching and gel coating the whole area this summer

Before
FFF404BD-F054-427F-800E-6B6DAB94CC23.jpeg


after:
AE9A99EC-4539-490C-BA24-B25DA9F1EC8E.jpeg
 
Strecker25 said:
Another little update today since it was pouring down rain and I couldn’t continue buffing.

the old shower boxes were gross, and to me it’s one of the things I just “do” on a new boat. For a couple hundred bucks it was worth it.

ignore the gaping holes in the floor, those were cut to get some water that I discovered out and I’ll be patching and gel coating the whole area this summer

Before
View attachment 101998

after:
View attachment 101999
Click to expand...

Whoa...is that a wirenut I see in on the floor???? :):)
 
Strecker25 said:
Another little update today since it was pouring down rain and I couldn’t continue buffing.

the old shower boxes were gross, and to me it’s one of the things I just “do” on a new boat. For a couple hundred bucks it was worth it.

ignore the gaping holes in the floor, those were cut to get some water that I discovered out and I’ll be patching and gel coating the whole area this summer

Before
View attachment 101998

after:
View attachment 101999
Click to expand...
It’s always nice to start the season with clean shower boxes. Looks good.
 
Strecker25 said:
Another little update today since it was pouring down rain and I couldn’t continue buffing.

the old shower boxes were gross, and to me it’s one of the things I just “do” on a new boat. For a couple hundred bucks it was worth it.

ignore the gaping holes in the floor, those were cut to get some water that I discovered out and I’ll be patching and gel coating the whole area this summer

Before
View attachment 101998

after:
View attachment 101999
Click to expand...
Ryan, I don't know if it is from the factory this way or not, but a friends new to him 410 has the same sump boxes but they also installed a couple 90 degree elbows and clear tubing towards the top of each box linking them together in case one of the pumps stops. Thought that was a great idea to share.
 
Cocktail Time said:
Ryan, I don't know if it is from the factory this way or not, but a friends new to him 410 has the same sump boxes but they also installed a couple 90 degree elbows and clear tubing towards the top of each box linking them together in case one of the pumps stops. Thought that was a great idea to share.
Click to expand...

great idea, I have a spare inlet that I can use for that. I'll drop the shower line in to the lower inlet and connect the two uppers. Thanks!!
 
You must log in or register to reply here.

Forum statistics

Threads
113,172
Messages
1,427,842
Members
61,086
Latest member
MrWebster
Back
Top