'95 330 DA Wiring Schematic needed

[dccjr]

Does anyone have an electronic version that I could have. Am changing out both dash boards and want it for reference on this project and others that will undoubtedly pop up.
Thanks
Don

 

[larrytbull]

wiring diagram prob won't help. I have same boat did boath last year
here are some tips

1. take a picture of back of panel with all connected. serves as a reference point
2. Move the guages one at a time, helps keep everything in check
3. you will find that there are common wire colors for ground, and dash light, once you figure this out, it will help
4. take your time

took me about 6 hours to both panels

good luck

 

[Lazy Daze]

I agree - the best way is to do your own pictures and labeling. However, it's not a bad idea to have the schematic, as well. Did you check on Sea Ray's website? If you have the original owner's supplement manual, that would be even better - since the one Sea Ray will have (for your year) will be a scanned copy and it might be hard to read.

 

[dccjr]

Thanks to both of you for responding. I have finished the gage panel with no problems and have now numbered & removed the 18 switches one by one replacing each wire as removed as well as making a diagram of each switch...no problems so far. Am waiting for Scott Cabra now to finish an alteration for me to rid the depth/temp/speed defunct gage from the switch dash center position. Will install a SR emblem in its place with Scott's help.

Presently installing LED back lighting for the switch panel with dimmer for same. The EL strips by ELTECH have died...most likely caused by corroded dimmer switch, so I'm replacing them with LED's. OEM dimmer I ordered was DOA so it's going back.
Have a nice working model using just a 1 K ohm pot and it dims the strip I purchased nicely, no need for a PWM with these.

Need to make sure same will dim the gage lights as well...circuit may need a second dimmer to handle the current...we'll see.

Well if anyone comes up with a schematic would still like a if for nothing else as a reference.
Thanks for the responses.
Don

 

[Lazy Daze]

Sounds like you've got it well under control!

Well if anyone comes up with a schematic would still like a if for nothing else as a reference.

Did you try SR's website?

 

[dccjr]

Here are the schematics for a '95-'99 330DA if anyone needs them.
Cheers
Don