Jetmart
Member
- Aug 10, 2010
- 282
- Boat Info
- 2004 Formula 37PC
(Previous 2004 280 Sundancer)
- Engines
- 8.1 Volvo
Where is the location of the evaporator pre filter on a 290?
How do you get to it?
How do you get to it?
A/C Evaporator filter Location on 2006 Sundancer 290
- Thread starter Jetmart
- Start date
Jetmart
Member
- Aug 10, 2010
- 282
- Boat Info
- 2004 Formula 37PC
(Previous 2004 280 Sundancer)
- Engines
- 8.1 Volvo
Anyone? I am looking at how to get to and where the air conditioner air filter is. There should be a pre-filter before the air conditioner coil.
- Nov 12, 2006
- 5,334
- Boat Info
- 1999 Sea Ray 330DA
Twin 7.4 MPI (310 propshaft HP) V-drives
- Engines
- Twin Mercury Marine marinized 7.4L L-29 V8s
Cast iron block w 4-bolt mains
Usually it's in the return grill.
Bay B's
New Member
- Aug 15, 2013
- 183
- Boat Info
- 2006 290 Sundancer, 2 Raymarine C70s, GPS, AIS SHS, RADAR, DSM-250, Avon RAB 2.81
- Engines
- Twin Mercruiser 5.0 MPI w/Bravo I Drives, Honda 2HP
Only filter I am aware of you access from the lift out covers center line Fwd master area. It is nothing impressive, but definitely needs cleaned a couple times a season. The only other thing I am aware of is the strainer in the EC port side.
Last edited:
Georgia SeaDawg
New Member
It should be right in front of the evaporator coil. It reAlly is less than impressive. Maybe 8x10, and very thin filter.
Groucho
Well-Known Member
It's under the couch/vberth. You will need to be pretty agile to get at it. I had to squeeze as far forward as I could to get the bed/couch unit to fold forward, then you will be able to get at the afore mentioned cheap filter.
blu-ray
Member
- Nov 17, 2013
- 55
- Boat Info
- 07 / 290 Sundancer, ( Sapphire blue hull) lowrance HDS-7 gen 2, 3g broadband radar/ structure scan
- Engines
- Twin 5.0 MPI Bravo 3's
PITA to get to but its mostly the Arms that need a second wrist! remove the couch/bed mattress then the secondary cover aft of the little hiding space then either biting a flashlight or get a head lamp the cheap screen slides into two grooves one on either side in front of the evap coil, ... even more fun to replace after clean!!