Bennett Actuator Assemby Replacement

[c310pilot]

I have a 2003 280da. Does anyone know if you can use the A1101A Standard Actuator to replace the Sea Ray A2214.5A Actuator. From what I can tell the only dif is the stoke, 2 1/16 on the Sea Ray and 2 1/2 on the A1101A Standard.

Thanks

 

[Tabman]

c310pilot,

May I ask why you are replacing the actuator? Let me know and I am sure I can help.

Tom McGow
Bennett Marine

 

[c310pilot]

My trim tab was not up 100% when the boat was lifted out of the water. The flange that mounts to the hull has deflected 15-20 degrees and I have some hydro fluid leaking between the mating surfaces of boat/ram.

 

[Tabman]

OK,

I can mail you a new top hinge, and pipe nipple along with instructions how to change it at no charge. That will fix the problem. Send me your name and address and it will be sent right away. Then let me know if you have any questions when you go to replace it.


Tom McGow
Bennett Marine

 

[c310pilot]

OK,

I can mail you a new top hinge, and pipe nipple along with instructions how to change it at no charge. That will fix the problem. Send me your name and address and it will be sent right away. Then let me know if you have any questions when you go to replace it.


Tom McGow
Bennett Marine

Fantastic! Thanks!!!! pm sent.

 

[Dancin Dave]

Way to go Tom (Tabman) !

Great customer service Bennett Marine!!!