Ec400 sliding door removal

[herring2on]

I need to remove my Norcold refrigerator that cannot be repaired and need to remove the sliding door to the cabin to get enough room. Does anybody know how to remove the top panel and door on this model? This is on a 1996 Sea Ray EC 400.


Sent from my iPad using Tapatalk

 

[Air O'Nautical]

http://clubsearay.com/showthread.php/13250-Official-400EC-thread?highlight=400ec

A Philips screw driver is all I needed.

Check the thread link above around page 29

 

[Air O'Nautical]

I need to remove my Norcold refrigerator that cannot be repaired and need to remove the sliding door to the cabin to get enough room. Does anybody know how to remove the top panel and door on this model? This is on a 1996 Sea Ray EC 400.


Sent from my iPad using Tapatalk

The sliding door is the only part you'll need to remove.
The doors on the fridge need to be removed and it'll slide through opening.

 

[Chambless Sanity]

I had the same challenge on my 1996 400 EC. The guys are right, there are 4 screws at the top and 3 on the bottom. Then the door comes right out. Careful of three things; 1) Scratching the door itself when removing and installing, 2) Make sure you keep an eye on the top rollers and don't let them get inside the panel on the left and don't let them break, 3) use tape to cover the interior soft paneling.