Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Pyro is the OP of this thread... you need to look at page 1 and the 1st post! Really?Who's Pyro? I only see Philip, and Chip! You found someone to produce them?
I have a 2005 Sea Ray 320. Only need the Starboard Side Panel. #: 1718618
I would like to announce the working prototype of a Keypad I have developed to replace the OEM EIM keypads. These keypads completely integrate into the existing vessel's EIM system without replacing relay boxes, re-wiring or temporary repairs. I am going into production now and should have a limited quantity available in 1-2 months. Keypads will be fully water proof, UV protected and fixes some of the reliability design flaws of the OEM version. PM me if interested.
Pictures here are functional prototypes. Minor differences in the production version.
View attachment 126071
View attachment 126072
View attachment 126073
These include a few additional features from OEM:
- Addition of underwater light button which can be customized/programmed to whatever circuit your underwater lights are connected to
- Addition of hatch enable button to enable to up/down buttons to protect accidental hatch lift
- Working on NMEA 2000 integration so that MFD can control all the same circuits the physical buttons can control
See video link to see unit working.
Pricing still being finalized but targeting $800/each (subject to change). I have a large investment into this product and it's very difficult to get ROI with low quantities.
DMP - Digital Marine Products
Chris Dohan
I would like to announce the working prototype of a Keypad I have developed to replace the OEM EIM keypads. These keypads completely integrate into the existing vessel's EIM system without replacing relay boxes, re-wiring or temporary repairs. I am going into production now and should have a limited quantity available in 1-2 months. Keypads will be fully water proof, UV protected and fixes some of the reliability design flaws of the OEM version. PM me if interested.
Pictures here are functional prototypes. Minor differences in the production version.
View attachment 126071
View attachment 126072
View attachment 126073
These include a few additional features from OEM:
- Addition of underwater light button which can be customized/programmed to whatever circuit your underwater lights are connected to
- Addition of hatch enable button to enable to up/down buttons to protect accidental hatch lift
- Working on NMEA 2000 integration so that MFD can control all the same circuits the physical buttons can control
See video link to see unit working.
Pricing still being finalized but targeting $800/each (subject to change). I have a large investment into this product and it's very difficult to get ROI with low quantities.
DMP - Digital Marine Products
Chris Dohan
Chris they look nice, however, they're different then the ones I have. These must be for an older boat. I have a 2005 Sea Ray 320. My pads are the kidney shape ones. Will you be doing those pads also?
Read the whole thread especially post #19!Chris they look nice, however, they're different then the ones I have. These must be for an older boat. I have a 2005 Sea Ray 320. My pads are the kidney shape ones. Will you be doing those pads also?
Hi, thanks for the interest. I did decide to delay my original plans of eyebrow only, and tackle the kidney style, so this took longer than my initial estimate. The last few production components are just finishing and shipping next week, so I hope to have it available for testing in a month. I've been a bit quiet because I don't want to commit to any dates, but I'm getting pretty close.
If you are committed to waiting, please PM me so I can plan accordingly.
Also, if anyone is nearby in CT or Long Island Sound and interested in testing please PM me. I have one or two people in Long Island, but the closer the better.
Hi, thanks for the interest. I did decide to delay my original plans of eyebrow only, and tackle the kidney style, so this took longer than my initial estimate. The last few production components are just finishing and shipping next week, so I hope to have it available for testing in a month. I've been a bit quiet because I don't want to commit to any dates, but I'm getting pretty close.
If you are committed to waiting, please PM me so I can plan accordingly.
Also, if anyone is nearby in CT or Long Island Sound and interested in testing please PM me. I have one or two people in Long Island, but the closer the better.
Hi, thanks for the interest. I did decide to delay my original plans of eyebrow only, and tackle the kidney style, so this took longer than my initial estimate. The last few production components are just finishing and shipping next week, so I hope to have it available for testing in a month. I've been a bit quiet because I don't want to commit to any dates, but I'm getting pretty close.
If you are committed to waiting, please PM me so I can plan accordingly.
Also, if anyone is nearby in CT or Long Island Sound and interested in testing please PM me. I have one or two people in Long Island, but the closer the better.
Hi, thanks for the interest. I did decide to delay my original plans of eyebrow only, and tackle the kidney style, so this took longer than my initial estimate. The last few production components are just finishing and shipping next week, so I hope to have it available for testing in a month. I've been a bit quiet because I don't want to commit to any dates, but I'm getting pretty close.
If you are committed to waiting, please PM me so I can plan accordingly.
Also, if anyone is nearby in CT or Long Island Sound and interested in testing please PM me. I have one or two people in Long Island, but the closer the better.
Pyro, this is great to hear. How are you coming along with the starboard and port side kidney shaped modules? I have a 2002 300 Sundancer and starting to have problems. I would love to avoid going somewhere else because a plug and play version without having to rewire the whole system would be ideal.
Hi, thanks for the interest. I did decide to delay my original plans of eyebrow only, and tackle the kidney style, so this took longer than my initial estimate. The last few production components are just finishing and shipping next week, so I hope to have it available for testing in a month. I've been a bit quiet because I don't want to commit to any dates, but I'm getting pretty close.
If you are committed to waiting, please PM me so I can plan accordingly.
Also, if anyone is nearby in CT or Long Island Sound and interested in testing please PM me. I have one or two people in Long Island, but the closer the better.
PyroI would like to announce the working prototype of a Keypad I have developed to replace the OEM EIM keypads. These keypads completely integrate into the existing vessel's EIM system without replacing relay boxes, re-wiring or temporary repairs. I am going into production now and should have a limited quantity available in 1-2 months. Keypads will be fully water proof, UV protected and fixes some of the reliability design flaws of the OEM version. PM me if interested.
Pictures here are functional prototypes. Minor differences in the production version.
View attachment 126071
View attachment 126072
View attachment 126073
These include a few additional features from OEM:
- Addition of underwater light button which can be customized/programmed to whatever circuit your underwater lights are connected to
- Addition of hatch enable button to enable to up/down buttons to protect accidental hatch lift
- Working on NMEA 2000 integration so that MFD can control all the same circuits the physical buttons can control
See video link to see unit working.
Pricing still being finalized but targeting $800/each (subject to change). I have a large investment into this product and it's very difficult to get ROI with low quantities.
DMP - Digital Marine Products
Chris Dohan
Pyro
I'd be interested in the port kidney switch pad
Rick J
Hi All,
See below for some pictures of the prototypes, since I don't think I have shared the kidney design yet. The plastic shells are being professionally painted now and then will be assembling the first batch. I am also considering adding an option to match the same red burlwood as the OEM panels. I will post pictures of those samples. I welcome feedback on this.
View attachment 132096
View attachment 132097
View attachment 132092
View attachment 132094
I also have been busy testing these on various boats thanks to many members. So far the following keypad part numbers are available and tested with more coming soon.
1797300, 1797304, 1606581, 1606573, 1718618, 1810625, 1810626
Please PM me if interested.
Chris
I have a 05 Sea Ray 300 Sundancer and would be in need of the Starboard Side kidney shaped unit but would purchase both sides if available. Let me know when they would be available to purchase please.I would like to announce the working prototype of a Keypad I have developed to replace the OEM EIM keypads. These keypads completely integrate into the existing vessel's EIM system without replacing relay boxes, re-wiring or temporary repairs. I am going into production now and should have a limited quantity available in 1-2 months. Keypads will be fully water proof, UV protected and fixes some of the reliability design flaws of the OEM version. PM me if interested.
Pictures here are functional prototypes. Minor differences in the production version.
View attachment 126071
View attachment 126072
View attachment 126073
These include a few additional features from OEM:
- Addition of underwater light button which can be customized/programmed to whatever circuit your underwater lights are connected to
- Addition of hatch enable button to enable to up/down buttons to protect accidental hatch lift
- Working on NMEA 2000 integration so that MFD can control all the same circuits the physical buttons can control
See video link to see unit working.
Pricing still being finalized but targeting $800/each (subject to change). I have a large investment into this product and it's very difficult to get ROI with low quantities.
DMP - Digital Marine Products
Chris Dohan
Hi All,
See below for some pictures of the prototypes, since I don't think I have shared the kidney design yet. The plastic shells are being professionally painted now and then will be assembling the first batch. I am also considering adding an option to match the same red burlwood as the OEM panels. I will post pictures of those samples. I welcome feedback on this.
View attachment 132096
View attachment 132097
View attachment 132092
View attachment 132094
I also have been busy testing these on various boats thanks to many members. So far the following keypad part numbers are available and tested with more coming soon.
1797300, 1797304, 1606581, 1606573, 1718618, 1810625, 1810626
Please PM me if interested.
Chris