Electrical Switch Pad

Discussion in 'Announcements & FAQs' started by Sue Verrill, Jul 24, 2020.

  1. Sue Verrill

    Sue Verrill New Member

    2
    Jul 24, 2020
    340 Sea Ray Sundancer 2003
    8.1 Mercruiser
    My husband and I are looking for a replacement electrical switch pad for our 2003 340 Sea Ray Sundancer. It appears it may have 2 different part numbers —- 1810625 or 1606581. I found one on eBay but it is sold out. It is the control panel on the left hand side of the control console. Wondering if anyone has had any luck finding one of these. We found a replacement for the entire console but it’s $3,700—yikes. Thanks
     
  2. PeteL

    PeteL Active Member

    166
    Aug 2, 2010
    Apollo Beach, FL
    2003 280 DA
    Twin 5.0
    Bravo III
    "Viva la Vida"
    Twin 5.0, bravo 3 drives
    I have an 03 Sundancer 280. Believe the switch panels are the same for our boats. I have a new starboard panel onboard my boat that I bought in hopes of fixing a failed windlass control. Unfortunately for me, it was not the switch panel, but rather the EIM that is bad. (the replacement switch panel did not fix my problem.) So I have this one, and will sell it. It cost me 445 + shipping. You can have it for 400. Let me know.
     
  3. ColoSR

    ColoSR Active Member

    199
    Apr 25, 2018
    2003 Sea Ray Sundeck 220
    MX 6.2L MPI Mercruiser with 2.2 Bravo III drive
  4. Sue Verrill

    Sue Verrill New Member

    2
    Jul 24, 2020
    340 Sea Ray Sundancer 2003
    8.1 Mercruiser
  5. Ted Butler

    Ted Butler New Member

    5
    Sep 14, 2020
    2004 Sundancer 300
    Twin 350 magnums, bravo 3
    Do you still have this switch panel.
     
  6. PeteL

    PeteL Active Member

    166
    Aug 2, 2010
    Apollo Beach, FL
    2003 280 DA
    Twin 5.0
    Bravo III
    "Viva la Vida"
    Twin 5.0, bravo 3 drives
    Yes I do. I need to dig it up, it is either on the boat or in my garage. PM me.
     
  7. Ted Butler

    Ted Butler New Member

    5
    Sep 14, 2020
    2004 Sundancer 300
    Twin 350 magnums, bravo 3
     
  8. Ted Butler

    Ted Butler New Member

    5
    Sep 14, 2020
    2004 Sundancer 300
    Twin 350 magnums, bravo 3
    If you locate it I’m interested in buying it.
     
  9. PeteL

    PeteL Active Member

    166
    Aug 2, 2010
    Apollo Beach, FL
    2003 280 DA
    Twin 5.0
    Bravo III
    "Viva la Vida"
    Twin 5.0, bravo 3 drives
    OK. I will be on the boat this weekend.
    I hope it solves your problem, as mine is the EIM.
     
  10. Ted Butler

    Ted Butler New Member

    5
    Sep 14, 2020
    2004 Sundancer 300
    Twin 350 magnums, bravo 3
    How was yours acting at the last. I’m thinking it might not be my problem.
     
  11. PeteL

    PeteL Active Member

    166
    Aug 2, 2010
    Apollo Beach, FL
    2003 280 DA
    Twin 5.0
    Bravo III
    "Viva la Vida"
    Twin 5.0, bravo 3 drives
    My problem was that the windlass controls were not acting right. The main power light would come on, but the windlass woudl not work. Or, I could not turn off the light. Bottom line, I could not operate the windlass from the help. I "think" I was able to use the foot switches. (Can't remember). We tried the new panel, nothing changed. Put the old one back and then created a separate windlass circuit. For the moment, all other switches are working (lights, water, stereo, etc)
     
  12. Ted Butler

    Ted Butler New Member

    5
    Sep 14, 2020
    2004 Sundancer 300
    Twin 350 magnums, bravo 3
    It could be my pad, I’m having trouble with more than one thing.
     
  13. Gord

    Gord Member

    32
    Oct 12, 2013
    Michigan
    280 Sundancer 2003
    Twin 5.0 MPI w/Bravo III
    I just went through this in August. I put the new FP Marine system in and it works great. I was having problems on the starboard side. My port side was working fine for now. This could be the EIM or the switch pad. I am not qualified to check this so i just replaced it. I do have the pad and EIM for the port side Part number 1606581
     
  14. ColoSR

    ColoSR Active Member

    199
    Apr 25, 2018
    2003 Sea Ray Sundeck 220
    MX 6.2L MPI Mercruiser with 2.2 Bravo III drive
    I replaced the pad, it corrected all my burnt out led issues but did not correct the functional issues. Th FP kit fixed everything
     
    Ted Butler likes this.

Share This Page

Show Sidebar