Engine hatch gasket replacement

[wendyjbenson]

Anyone know where I can purchase the engine hatch gasket? This is the 2.5 inch X 1 inch rubber gasket that runs around the underside of the engine hacth of my 340. I found lots of threads on how to reattach, couldnt find any on replacement. Any help will be appreciated.

 

[roosevelt14]

This should be your part # 704486 from Sea Ray

 

[wendyjbenson]

Yea, I checked with the Sea Ray dealer, they can order, but its 5.00 a foot. Its a piece of rubber foam, I am thinking I should be able to purchase for far less than the 1000% mark up from Sea Ray. Just need to find a supplier Thanks for your reply

 

[sdarc]

Just guessing but you could try looking at 3M products or maybe even auto resto weatherstrip. Like http://www.steelerubber.com/

 

[CliffA]

you may want to check out JC Whitney....they have a fairly large selection of weather strips that may can be used for the gasket....i need to replace my hatch gasket as well....

 

[sdarc]

Garage door gasket maybe?

 

[390x]

Mcmaster-Carr has all kinds of gasketing/weather stripping. They might not have 2.5x1, but they'd have 1" thick x some other dimension, and if you had to you could put two pieces together to get the desired result. I bought some 1x3/4 from them last year for the same reason.

 

[Luis]

Anyone know where I can purchase the engine hatch gasket? This is the 2.5 inch X 1 inch rubber gasket that runs around the underside of the engine hacth of my 340. I found lots of threads on how to reattach, couldnt find any on replacement. Any help will be appreciated.

Hi,
I see you posted this years ago, but I can’t figure out how to reattach my boat’s engine room door gasket.
Do you happen to know where I can find some tips on how to do so?
Thanks

 

[Luis]

Anyone know where I can purchase the engine hatch gasket? This is the 2.5 inch X 1 inch rubber gasket that runs around the underside of the engine hacth of my 340. I found lots of threads on how to reattach, couldnt find any on replacement. Any help will be appreciated.

Hi,
I see you posted this years ago, but I can’t figure out how to reattach my boat’s engine room door gasket.
Do you happen to know where I can find some tips on how to do so?
Thanks