- Jun 5, 2016
- 5,614
- Boat Info
- 410 Sundancer
2001
12" Axiom and 9" Axiom+ MFD
- Engines
- Cat 3126 V-Drives
My old Jabasco water accumulator is leaking, so it needs to come out along with a weird raw water/fresh water connection. To do this, I just need to connect the HOT water inlet to the main pipe coming from the front of the boat where the tank/pump accumulator is located.
I thought that Sea Ray used 15mm pipe/fittings, but looking online, SAE fittings are white and Metric is black. My fitting are all white, so I'm thinking I have 1/2" installed. Can anybody confirm you can tell by the color of the fitting? I found no obvious lables/marking on the outside.
I thought that Sea Ray used 15mm pipe/fittings, but looking online, SAE fittings are white and Metric is black. My fitting are all white, so I'm thinking I have 1/2" installed. Can anybody confirm you can tell by the color of the fitting? I found no obvious lables/marking on the outside.