Fuel Hose Size?

[wyrman]

I need to replace the fuel filler hoses.
I can't get to them to check the size without a ton of work, figured I'd do that when I get the hose.
Does anyone know the size?
From what I can see, it's either 1 1/4" or 1 1/2", buy like I said, I can't get to them to put a tape on them.

 

[Nater Potater]

Any chance of sighting along the tube sides anywhere? A lot of them have the size either inked or even cast into the rubber. I know it's no help, and I understand not wanting to pull them until you actually have the parts in hand.

 

[JHornsby3]

It probably wouldn't do any good to measure ours anyway. Most likely changed size from ours to those new fangled boats.

I can if you you want @wyrman

 

[wyrman]

I'm going to go to the boat tomorrow and open things up and get the size.
I'll check and see if it has the size on the side, good idea Nater Potater.
I appreciate the offer JHornsby3, bit I'll get it.
I need to get a length measurement anyways.

 

[JHornsby3]

If you can't find any, I know of some in SW Idaho that we can get late at night.

 

[Nater Potater]

If you can't find any, I know of some in SW Idaho that we can get late at night.

Trust me; mine would be worse than anything you've got.

 

[JHornsby3]

They are the same age. LOL

 

[CNYBoater]

First thought, is the parts schematic available for download on the Sea Ray site? I know that at one point I downloaded mine.

second thought, can you remove the filler body the cap screws into from the topside? Maybe dismount filler housing and see if there is enough room to pull some hose out?

 

[wyrman]

First thought, is the parts schematic available for download on the Sea Ray site? I know that at one point I downloaded mine.

second thought, can you remove the filler body the cap screws into from the topside? Maybe dismount filler housing and see if there is enough room to pull some hose out?

I have the parts schematic on my computer, I'll check it out, thanks for the suggestion.
I think the top is accessible if I remove the speaker for the port side.
I'm going down later this morning to take a look at it.

 

[wyrman]

Found the parts manual, it is 1 1/2".