GAUGES - 1998 SD 290 - REPLACEMENTS?

[CoronCoron]

(1) of my temp gauges and (1) of my trim gauges need replacement Oddly, there is no manufacturers name on the front plate nor where I have looked on the back side.
The OD of the rear is 2" while the OD of the front trim ring is 2 3/8".
I have attached pics.
Hopefully someone has been through this and can give me a contact or two. / Thank you

 

[CoronCoron]

Here is the trim gauge

 

[The Bill Collector]

flounder pounder

https://www.fpmarine.com/

 

[Air O'Nautical]

Yup, FPmarine.com
Your looking for the “Legend Series”

 

[CoronCoron]

flounder pounder

https://www.fpmarine.com/

Very good! Thank you

 

[CoronCoron]

Yup, FPmarine.com
Your looking for the “Legend Series”

Great! Thank you for your quick response. I have already ordered them from FP, will have them in 2 days!

 

[HawkX66]

I didn't like the factory gauges and wanted to do something a little different. This is what I did on my 290DA. Just something to think about if you don't want to stick with factory. I wanted to be able to see mine better.

 

[atrick]

Sierra makes about 6 to 8 different style gauges and I've been changing mine out a couple at a time and they are all supposed to work with OEM senders. So far mine have all worked but if they didn't senders are cheap enough and its probably time to changes some of them anyway.